LS400 owners post your wheel setup
#1684
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
got the new winter beater setup on!!
okay so you 1st gen folks interested in the most aggressive setup you can run without fender pulling
i would say with confidence that this is it! -- which is basically what i was going for
STOCK CAMBER AFTER BC COILS: -4 ALL AROUND
18X9.5+12 225/40 all the way around
shaved fenders with no pull or crazy camber
oddly not alot of lexus in the employee parking area at lexus here lol
okay so you 1st gen folks interested in the most aggressive setup you can run without fender pulling
i would say with confidence that this is it! -- which is basically what i was going for
STOCK CAMBER AFTER BC COILS: -4 ALL AROUND
18X9.5+12 225/40 all the way around
shaved fenders with no pull or crazy camber
oddly not alot of lexus in the employee parking area at lexus here lol
#1685
Lexus Test Driver
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
got the new winter beater setup on!!
okay so you 1st gen folks interested in the most aggressive setup you can run without fender pulling
i would say with confidence that this is it! -- which is basically what i was going for
STOCK CAMBER AFTER BC COILS: -4 ALL AROUND
18X9.5+12 225/40 all the way around
shaved fenders with no pull or crazy camber
oddly not alot of lexus in the employee parking area at lexus here lol
okay so you 1st gen folks interested in the most aggressive setup you can run without fender pulling
i would say with confidence that this is it! -- which is basically what i was going for
STOCK CAMBER AFTER BC COILS: -4 ALL AROUND
18X9.5+12 225/40 all the way around
shaved fenders with no pull or crazy camber
oddly not alot of lexus in the employee parking area at lexus here lol
![Wink](https://www.clublexus.com/forums/images/smilies/wink.gif)
#1687
#1688
![Smile](https://www.clublexus.com/forums/images/icons/icon7.gif)
got the new winter beater setup on!!
okay so you 1st gen folks interested in the most aggressive setup you can run without fender pulling
i would say with confidence that this is it! -- which is basically what i was going for
STOCK CAMBER AFTER BC COILS: -4 ALL AROUND
18X9.5+12 225/40 all the way around
shaved fenders with no pull or crazy camber
oddly not alot of lexus in the employee parking area at lexus here lol
okay so you 1st gen folks interested in the most aggressive setup you can run without fender pulling
i would say with confidence that this is it! -- which is basically what i was going for
STOCK CAMBER AFTER BC COILS: -4 ALL AROUND
18X9.5+12 225/40 all the way around
shaved fenders with no pull or crazy camber
oddly not alot of lexus in the employee parking area at lexus here lol
#1690
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Where do you get the mesh?
#1694
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
so excited! then i just need to get jdm style tails and stubby antenna..i think mines disconnected somewhere back in the trunk area