LS400 owners post your wheel setup
#766
Lexus Champion
#767
Driver School Candidate
iTrader: (1)
Join Date: Apr 2012
Location: Utah
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
whit3b0y
Yea the roads are chet here i DD it for a month till the tires are gone now and im in Salt Lake City so near the city here.
timmy0tool
yes you heard right its a big o tire lol and ill have pictures up shortly before i lowered it.
AYEmike
and no not really business been kinda slow
Yea the roads are chet here i DD it for a month till the tires are gone now and im in Salt Lake City so near the city here.
timmy0tool
yes you heard right its a big o tire lol and ill have pictures up shortly before i lowered it.
AYEmike
and no not really business been kinda slow
#769
#772
Lead Lap
iTrader: (1)
Can anyone confirm if there is a 10mm H&R spacer that will work with our hubs ??? Im looking at a set of wheels & need 7mm clearance. Since thats uncommon size & I only trust H&R... Maybe Project Kic$... What are my options ?
Can a spacer be machined down ?
Can a spacer be machined down ?
Last edited by VanCityLS4; 04-28-12 at 04:46 PM.
#774
Lead Lap
iTrader: (1)
I see that there are 10mm H&R's with 60.1 center bore but not listed under Lexus.
Recently added new wheels/tires. I wanted an OEM feel so I kept the tire size as close to stock diameter as possible. Tires are Falken Azenis PT-722 235/50/17 & 255/45/17. Wheels are rare 1998 Polished Supra TT's in 17x8 & 17x9.5 +50 all around. Still working on the ride height...
Recently added new wheels/tires. I wanted an OEM feel so I kept the tire size as close to stock diameter as possible. Tires are Falken Azenis PT-722 235/50/17 & 255/45/17. Wheels are rare 1998 Polished Supra TT's in 17x8 & 17x9.5 +50 all around. Still working on the ride height...
#775
BahHumBug
iTrader: (10)
buy the 10s, run them, then decide if you wanna deal with the pain of finding a good machinist to rig it up on a lathe/mill and take off 3mm on each one while still preserving the hub extension.
i've been running 15mm H&Rs for a couple years now without issue, v1 with separate extended studs.
i've been running 15mm H&Rs for a couple years now without issue, v1 with separate extended studs.
#776
Driver School Candidate
finally got my megan ez installed.
wheels are enkei rp03 F-19x8.5 et 20 i think R-19x9.5 et 42 tires 235/35 all around
wheels are enkei rp03 F-19x8.5 et 20 i think R-19x9.5 et 42 tires 235/35 all around
Last edited by pejayz; 05-21-12 at 06:14 PM.
#777
Driver School Candidate
1991 Lexus LS400
Custom Short Body Coilovers for now until bags are on.
1st setup:
Front : 18x9.5 +10 225/40/18
Rear 18x10 +10 225/40/18
2nd setup :
Front : 19x9.5 +8 225/35/19
Rear : 19x10.5 + 18 245/35/19
New setup:
Front : 19x9.5 -4 225/35/19
Rear: 19x11 -4 245/35/19
Rear Only Teaser Shots for now
Custom Short Body Coilovers for now until bags are on.
1st setup:
Front : 18x9.5 +10 225/40/18
Rear 18x10 +10 225/40/18
2nd setup :
Front : 19x9.5 +8 225/35/19
Rear : 19x10.5 + 18 245/35/19
New setup:
Front : 19x9.5 -4 225/35/19
Rear: 19x11 -4 245/35/19
Rear Only Teaser Shots for now
#778
1991 Lexus LS400
Custom Short Body Coilovers for now until bags are on.
1st setup:
Front : 18x9.5 +10 225/40/18
Rear 18x10 +10 225/40/18
2nd setup :
Front : 19x9.5 +8 225/35/19
Rear : 19x10.5 + 18 245/35/19
New setup:
Front : 19x9.5 -4 225/35/19
Rear: 19x11 -4 245/35/19
Rear Only Teaser Shots for now
Custom Short Body Coilovers for now until bags are on.
1st setup:
Front : 18x9.5 +10 225/40/18
Rear 18x10 +10 225/40/18
2nd setup :
Front : 19x9.5 +8 225/35/19
Rear : 19x10.5 + 18 245/35/19
New setup:
Front : 19x9.5 -4 225/35/19
Rear: 19x11 -4 245/35/19
Rear Only Teaser Shots for now