dengman

love the wheels. I would never be able to make it up that driveway.

Shmee

iTrader: (3)

what sort of body work are you going to pull the fenders? just using a roller or hammer and dolly?

SuicidnS13

iTrader: (2)

Im confused. My body work has already been done. They used fender rollers, heat guns, torches, cutters etc. Let me see if I can find you a couple of shots showing it. Also my body guy came over last night to pull a little more on my fronts. He actually pulled first, and then cut the lip and rolled what was left flat. Gained another 1/2" in the front. I think Im gonna send the wheels out to be converted to 19 x 11.5/10.5 or a 12/11 setup.

http://www.flickr.com/photos/suicidns13/8356323518/http://www.flickr.com/photos/suicidns13/8356323518/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8356324354/http://www.flickr.com/photos/suicidns13/8356324354/ by http://www.flickr.com/people/suicidns13/, on Flickr



This is with the front jacked up and maxing out rear camber. You can see the body lines in the pull but barely. I didnt want it to look obvious. Maybe once I go to 12's Ill have the fenders radiused.

http://www.flickr.com/photos/suicidns13/8356325076/http://www.flickr.com/photos/suicidns13/8356325076/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8355264087/http://www.flickr.com/photos/suicidns13/8355264087/ by http://www.flickr.com/people/suicidns13/, on Flickr


And the results

http://www.flickr.com/photos/suicidns13/8352140141/http://www.flickr.com/photos/suicidns13/8352140141/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8353201218/http://www.flickr.com/photos/suicidns13/8353201218/ by http://www.flickr.com/people/suicidns13/, on Flickr


Absolutely no rubbing at all, even on the worse bumps. Gonna need to cut out the UCA clearance holes next. But Ill do that when we install the airbags onto my coilovers.

Proper shoot coming up tuesday~

xtremex626

iTrader: (3)

god damn.. im in love. your body guy did an awesome job with your fenders. very clean!

Cartune

iTrader: (3)

love that ls body style. nice wheels. goes very well together.

SuicidnS13

iTrader: (2)

Where is the like button LOL...

thanks bro...

dengman

Just keep in mind its possible to pop your SRS airbags from UCA slap. First hand experience

Reach_01

iTrader: (3)

would 18x10.5+20 fit up front on a ucf10 with just a roll? someone by me is selling a set of xxr 526 10.5 all arround with 225/40 and 235/40. I'll be on megan EZ streets come spring time. I was about to purchase the staggared set untill I saw this posting.

PureDrifter

iTrader: (10)

just a roll and no pull? no.

timmy0tool

iTrader: (7)

loving the progress in here! suicide, the 19's looks much better than the 20s! how's your downpipe doing?

zbox

SuicidnS13

iTrader: (2)

Looking good zbox. I had those wheels on my 240sx back in the day.

SuicidnS13

iTrader: (2)

While Shooting CalitriSC's sick IS-F for wheeldude.com tonight I snuck some proper shots of my car

http://www.flickr.com/photos/suicidns13/8363016665/http://www.flickr.com/photos/suicidns13/8363016665/ by http://www.flickr.com/people/suicidns13/, on Flickr

http://www.flickr.com/photos/suicidns13/8364081854/http://www.flickr.com/photos/suicidns13/8364081854/ by http://www.flickr.com/people/suicidns13/, on Flickr

Tomorrow is her official shoot

JDMJNKY

Saucy man....love that stance

AYEmike

you got the coolest car