Mines Fitted...Report !!
#31
#33
Keith is one of the only people on ebay selling them. If I'm missing another seller, post up a link. Otherwise, there are very very little around at this point.
Yes, this one is only for 1st gen , 93-94. But, there are Rom Tuned ECU available for all gen. I can get you one new if you like. They range in price from $1600-2200 + SH + Import duties/taxes.
Celsior is a VERY small market, hence the rare.
I'm NOT the seller - I'm simply posting up a RARE tuned ECU for the person who asked about one.
Last edited by illcelsior; 09-05-07 at 06:01 AM.
#35
I suppose it just comes down to our definition of rare. I have only seen a few over the last 6 months for Celsior.
Sucks to hear about the loss of immobilizer. Makes sense I suppose. It would be nice though with the tuning of the VVTi
#36
BahHumBug
iTrader: (10)
Any Rom Tuned ECU is a rare find for this car.
I suppose it just comes down to our definition of rare. I have only seen a few over the last 6 months for Celsior.
Sucks to hear about the loss of immobilizer. Makes sense I suppose. It would be nice though with the tuning of the VVTi
I suppose it just comes down to our definition of rare. I have only seen a few over the last 6 months for Celsior.
Sucks to hear about the loss of immobilizer. Makes sense I suppose. It would be nice though with the tuning of the VVTi
#39
There are quite a few companies that offer them for our cars.
MiNe's, SARD, TOM'S, Blitz, Field Boxer, etc. How many you will find today; unknown.
Just have to find one on the market as you say.
#41
#42
I assume that I could buy this for my supercharger project since I do have a 1993. What would I lose from ditching the stock ECU???? I am speaking off engine sensors and interior accessories???
It does sound tempting since my engine will definetely need an ECU mod.
It does sound tempting since my engine will definetely need an ECU mod.
#43
You took the time to put together a kick **** SC project. Spend a little coin and finish the project right. A full EMS tuned on the street w/ wb and on the dyno .
A rom tuned ECU (or the stock ECU) will not net you anything close to what you deserve.
#44
BahHumBug
iTrader: (10)
You need a full aftermarket ECM. Not a Rom Tuned ECU that is certainly NOT for a Forced Induction setup.
You took the time to put together a kick **** SC project. Spend a little coin and finish the project right. A full EMS tuned on the street w/ wb and on the dyno .
A rom tuned ECU (or the stock ECU) will not net you anything close to what you deserve.
You took the time to put together a kick **** SC project. Spend a little coin and finish the project right. A full EMS tuned on the street w/ wb and on the dyno .
A rom tuned ECU (or the stock ECU) will not net you anything close to what you deserve.
a simple fuel/timing piggyback on the OEM ecu should suffice
a FTC-01 (i think thats the right model) should be perfect
#45
Anything would be better than just running the OE ECU though. Cannot argue that.
But, not my project.