Upper Control Arms for 1991 LS400
02-04-10 | 07:13 PM
#31
Pole Position
Joined: Nov 2009
Posts: 318
Likes: 0
From: Virginia
You may want to go back and look at that site again, they are $199 each,, not a pair. I pulled it up myself, even though I have already replaced one side of my UCA and will be doing the other side soon. If you go to the shopping cart and put in a quantity of 2, the total will come to $398. They do kinda misrepresent it in saying that it is a kit and it includes both left and right, but trust me if you read a little further down and look in the quantity box, you will notice that the quantity is only 1 at $199(Kinda a small loophole in phrasing)
12-21-10 | 03:15 PM
#33
Lead Lap
Joined: Apr 2007
Posts: 663
Likes: 1
From: CO
Jim, there was another thread that was just posted on here I was reading and he said that there was no fitting problems, only that the thickness of the actual arm seemed a little smaller than the oem arm.
As for the Holding up I am curious on this also..
As for the Holding up I am curious on this also..
12-29-10 | 06:04 PM
#36
Rookie
Joined: Feb 2009
Posts: 63
Likes: 3
From: Utah
I have had no problems with the aftermarket control arms that I installed last July. FYI I did a write up on installation with comparison pictures of the factory and aftermarket parts side by side. Just search user KMinAF.
Thread
Thread Starter
Forum
Replies
Last Post
