will 20x10 fit in the front ucf10
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: california
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
will 20x10 fit in the front ucf10
20x10 with a 35 offset.. for the fronts.. rolling and pulling is not a problem..
the real question is will it clear all the components in the front or else would i have to bang on the inner fender passage like the 240s with extra angle
thanks
tony
oh.. and tire size will prolly be 245
the real question is will it clear all the components in the front or else would i have to bang on the inner fender passage like the 240s with extra angle
thanks
tony
oh.. and tire size will prolly be 245
#4
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: california
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
the reason for the 20s is because of the bodykit.. with it on it is too low.
i currently have 18s and they look small for the car right now.. it look alright without the kit
thanks
ps.. this is not tony angelo
my name is tony pham
i currently have 18s and they look small for the car right now.. it look alright without the kit
thanks
ps.. this is not tony angelo
my name is tony pham
Trending Topics
#8
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: california
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
i know the car could handle 20s fine.. but my question is
will the front clear a 20x10 +35
i know i would have to roll and pull a lil just like the rear but will it hit anything when turning
will the front clear a 20x10 +35
i know i would have to roll and pull a lil just like the rear but will it hit anything when turning
#11
Driver School Candidate
Thread Starter
Join Date: Aug 2007
Location: california
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
i totally agree with what your saying puredrifter.
i personally dont like the 20s look thats why i went with 18s with the stock body
the 20s on the stock body makes the car look like its riding high even though the wheel gap might be gone.
but now that i have the kit it wouldnt matter.. i actually need the car to be higher but the kit will make it look low so its kinda like an illusion where the wheel gap is gone and tucked but the frame of the car will actually sit higher.
does anyone have a car kitted with 20s to show puredrifter what im talking about.
i personally dont like the 20s look thats why i went with 18s with the stock body
the 20s on the stock body makes the car look like its riding high even though the wheel gap might be gone.
but now that i have the kit it wouldnt matter.. i actually need the car to be higher but the kit will make it look low so its kinda like an illusion where the wheel gap is gone and tucked but the frame of the car will actually sit higher.
does anyone have a car kitted with 20s to show puredrifter what im talking about.
#12
My homeboy is rockin 20" AME's on his first gen Junction Produce LS.
I think the first gen's look dope with 20's but i say 19's look a lot cleaner.
I think the first gen's look dope with 20's but i say 19's look a lot cleaner.
Last edited by KevinfrmSD; 01-08-08 at 07:13 PM.
#13
i think 19's look fine on any 1st gen ls...kitted or not...it's just not a BIG car...the 2nd and 3rd gen LS are more suited for 20's but can easily pull off 19's...
here's my LS with a full kit and 19's...
[IMG][/IMG]
ucf2x with 19's
[IMG][/IMG]
same car with 20's (kinda hard to see)
here's my LS with a full kit and 19's...
[IMG][/IMG]
ucf2x with 19's
[IMG][/IMG]
same car with 20's (kinda hard to see)