Post up Recent pixs of YOUR car (LS400s)
08-13-10, 04:41 PM
#2178
Lexus Test Driver
Join Date: Nov 2007
Location: TX
Posts: 843
Likes: 0
Received 0 Likes
on
0 Posts
let's be objective about this. a coilover with a spring rate ~3x stiffer than stock is never going to ride anywhere near the same. to those wanting a lowered stance it can be bearable, or even enjoyable, but to someone wanting a stock-like ride quality it is a huge difference.
08-13-10, 06:18 PM
#2180
Pole Position
True that, I have a friend with a Bilstein + H&R setup and it rides closer to stock than Megans do. For the spring rate that they have, Megans are very smooth, but not quite like stock.
08-14-10, 02:31 PM
#2182
Pole Position
iTrader: (9)
Join Date: Aug 2008
Location: North-Holland Amsterdam
Posts: 398
Likes: 0
Received 5 Likes
on
5 Posts
@PD: they don't carry the Tein CS for UCF10/11's do they?
I have the hardest damping settings on front for those rediculous speed bumps or I will scrape in no time, Megans still ride fairly good though, But I want air to have some more distance for in town, and have it dumped in 'speed bump free zone's'
At my cousin's, he's doing some modelling on the hood. hahahaha
Still a great car for being 17 years and almost 240K, definetely a good buy
I have the hardest damping settings on front for those rediculous speed bumps or I will scrape in no time, Megans still ride fairly good though, But I want air to have some more distance for in town, and have it dumped in 'speed bump free zone's'
At my cousin's, he's doing some modelling on the hood. hahahaha
Still a great car for being 17 years and almost 240K, definetely a good buy
Last edited by Asia-H.T.; 08-14-10 at 02:46 PM.
08-14-10, 04:10 PM
#2183
08-14-10, 04:30 PM
#2184
@PD: they don't carry the Tein CS for UCF10/11's do they?
I have the hardest damping settings on front for those rediculous speed bumps or I will scrape in no time, Megans still ride fairly good though, But I want air to have some more distance for in town, and have it dumped in 'speed bump free zone's'
At my cousin's, he's doing some modelling on the hood. hahahaha
Still a great car for being 17 years and almost 240K, definetely a good buy
I have the hardest damping settings on front for those rediculous speed bumps or I will scrape in no time, Megans still ride fairly good though, But I want air to have some more distance for in town, and have it dumped in 'speed bump free zone's'
At my cousin's, he's doing some modelling on the hood. hahahaha
Still a great car for being 17 years and almost 240K, definetely a good buy
that's the only part of the beatsonic kit you see, the other part is a wiring harness. they sell 4 versions of the faceplate: single and double din, either factory gray, or woodgrain match finish.
The following users liked this post:
GrapeDaddy (07-05-20)
08-18-10, 07:43 PM
#2189
Lexus Test Driver
No new mods or anything (saving for camera gear...), but I did spend about 8 hours yesterday washing and buffing and waxing and all that good stuff. Took her down to the park for a quick photo shoot:
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.