Post up Recent pixs of YOUR car (LS400s)
#6872
#6873
#6874
#6876
This is what I don't get. I bought wheels +30 for the rear and +35 for the front of my 92 in those same widths and they stick out like crazy. Easy a inch past the front fenders and at least two inches in the rear. I think something is up with the wheels.
#6877
I do know that the ucf10 is a slightly smaller car than my ucf20. Also before I lowered mine the fronts wheels were sticking out .5" and the rears were completely flush. Are you lowered? Slamming sunk my fronts in 1 inch and the rears easy 1.5".
#6878
It has the H&R springs on it. I'm sending these AV50's back. I'm thinking these wheels are designed for the stretched tire cambered look and that's not what I'm after. I wondered if it something to do with the size of the car.
#6880
Had to raise the front up a little bit. For some reason the front driver side kept rubbing and rubbed away some of the fender liner by the fender lip. No rub on top of fender liner so I think I'm ok but I didn't think 225/35 would rub on 19x9 +0 with a roll and pull. Lesson learned I'm replacing them with 215/35 the next time I need tires.
#6881
My early 92 with my other money pit hangin out
Haven't really done anything to the LS yet cus I've been going through and fixing stuff, doing maintenance, and getting the car road worthy... Got it running and driving for 800 so it needs stuff haha
First up is coils and wheel spacers
Basically gonna make it a clean respectable daily cus I hate how boring the current daily (05 altima) is and I miss daily-ing one of these
Haven't really done anything to the LS yet cus I've been going through and fixing stuff, doing maintenance, and getting the car road worthy... Got it running and driving for 800 so it needs stuff haha
First up is coils and wheel spacers
Basically gonna make it a clean respectable daily cus I hate how boring the current daily (05 altima) is and I miss daily-ing one of these
The following users liked this post:
GrapeDaddy (06-29-20)
#6885