19" G37 Rims on a LS400?! Teaser Pics
08-16-08, 05:28 PM
#31
Confirmed.
so if I get 10mm hubcentric with extended studs wouldn't the back or the rim hit the tips of the original studs that pokes thru? I don't think there are holes at the back of the rims and arn't the original studs like 20mm?
Maybe I should just slap on some 18" g-spiders that I have lying around..
08-16-08, 05:44 PM
#32
Lead Lap
Join Date: Nov 2005
Location: CA
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
make sure you actually measure. i had some misc wheels prior to g35 wheels and thought all i needed was 5-10mm but found out i needed more and ended up getting 15mm AND shaved my calipers
and to answer your question, g35 wheels did fit without spacers, but i went ahead and used spacers anyways. take a look behind the wheel for this if you are using bolt on spacers. can you take a pic of the inside of the wheel for reference please? i'm looking to find a set of g37 wheels also, but need to make sure there is clearance
http://cgi.ebay.com/ebaymotors/5x114...spagenameZWDVW
and to answer your question, g35 wheels did fit without spacers, but i went ahead and used spacers anyways. take a look behind the wheel for this if you are using bolt on spacers. can you take a pic of the inside of the wheel for reference please? i'm looking to find a set of g37 wheels also, but need to make sure there is clearance
http://cgi.ebay.com/ebaymotors/5x114...spagenameZWDVW
Last edited by chubby; 08-16-08 at 05:51 PM.
08-17-08, 01:50 AM
#35
make sure you actually measure. i had some misc wheels prior to g35 wheels and thought all i needed was 5-10mm but found out i needed more and ended up getting 15mm AND shaved my calipers
and to answer your question, g35 wheels did fit without spacers, but i went ahead and used spacers anyways. take a look behind the wheel for this if you are using bolt on spacers. can you take a pic of the inside of the wheel for reference please? i'm looking to find a set of g37 wheels also, but need to make sure there is clearance
and to answer your question, g35 wheels did fit without spacers, but i went ahead and used spacers anyways. take a look behind the wheel for this if you are using bolt on spacers. can you take a pic of the inside of the wheel for reference please? i'm looking to find a set of g37 wheels also, but need to make sure there is clearance
Here's a pic of the inside part of the rim. I think I'll run 15mm spacers on front rims to allow a good amount of clearance. the caliper was grazing the spokes while I was turning the wheel...so a H&R 10mm or 15mm hubcentric with extended bolts should be enough. I also got hubcentric rings that would be put on the adapters since the Lexus bore is 60.1 and inifiniti is 66.1. chubby - did you run hubcentric rings on top of your spacers with ur g35 rims?
Also got blank centercaps to get rid of the inifiniti logos
Last edited by Cloud9; 08-17-08 at 02:56 AM.
08-17-08, 04:38 PM
#36
Lead Lap
Join Date: Nov 2005
Location: CA
Posts: 524
Likes: 0
Received 0 Likes
on
0 Posts
08-18-08, 09:53 PM
#37
got the blank center caps and hub centric rings(66.1mm / 60.1mm)
15mm hub centric spacers should be here this week. Clazzio R Leather is being installed also and a full monotone black paint job on the outside.
in beige...
Damn this project is going slooooooow
15mm hub centric spacers should be here this week. Clazzio R Leather is being installed also and a full monotone black paint job on the outside.
in beige...
Damn this project is going slooooooow
08-21-08, 08:09 PM
#44
Pole Position
Join Date: Jun 2008
Location: Fl
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
