UCF20 visors on my UCF10. Painted trim.
#1
Pole Position
Thread Starter
UCF20 visors on my UCF10. Painted trim.
Since its impossible to find UCF10 Window Visors I bought the UCF20 ones. The Chrome trim makes it totally obvious that the rears dont fit correctly, so i decided to paint the trim black...
When I first unwrapped them.
Masked off with blue painters masking tape.
Sanded the trim with 600 grit sandpaper just to rough it up a bit.
Clear plastic primer and Gloss black paint. Forgot to take a pic of the clear coat :P
2 coats primer, 2 coats black, 4 coats clear.
One of my favorite employees :lol:
When I first unwrapped them.
Masked off with blue painters masking tape.
Sanded the trim with 600 grit sandpaper just to rough it up a bit.
Clear plastic primer and Gloss black paint. Forgot to take a pic of the clear coat :P
2 coats primer, 2 coats black, 4 coats clear.
One of my favorite employees :lol:
#5
Pole Position
Thread Starter
#7
Pole Position
Thread Starter
Even though they look kinda weird since theyre meant for a 2ls, theyll look even more odd if you only use the fronts and not the rears.
One day I'll probably paint the whole visor black... too lazy right now though =P
One day I'll probably paint the whole visor black... too lazy right now though =P
Trending Topics
#9
Pole Position
Thread Starter
#11
Pole Position
Thread Starter
I think the best bet would be to fully paint them black
#13
Pole Position
Thread Starter