98 LS front brakes/rotors
#17
#19
Intermediate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I've decided to fix some of the nagging issues with my 400 as opposed to trading it off. I've searched the forums to no avail.
First thing is a left front wheel bearing. The bearing and seal are purchased and I can handle that job.
The next thing is the brake pulsation I have. I replaced the pads a year ago or so and there is still plenty of material there. But, I don't think I performed the job correctly. In hindsight, I should have had the rotors turned at the same time. So, I will do the job again.
What is the rotor min thickness (again it is the fronts, 98 LS)?
I'll replace the rotors (Brembo, plain) if I have to but I rather turn them if possible.
Thanks in advance.
First thing is a left front wheel bearing. The bearing and seal are purchased and I can handle that job.
The next thing is the brake pulsation I have. I replaced the pads a year ago or so and there is still plenty of material there. But, I don't think I performed the job correctly. In hindsight, I should have had the rotors turned at the same time. So, I will do the job again.
What is the rotor min thickness (again it is the fronts, 98 LS)?
I'll replace the rotors (Brembo, plain) if I have to but I rather turn them if possible.
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
98LS
LS - 1st and 2nd Gen (1990-2000)
5
07-08-08 09:31 PM