Idler pulleys...bearings replaceable?
01-19-09 | 11:17 AM
#1
Thread Starter
Driver School Candidate
Joined: Jan 2006
Posts: 8
Likes: 0
From: NC
Idler pulleys...bearings replaceable?
I have heard that the bearings in the idler pulleys for the serpentine belt can be pressed out and replaced with locally available bearings in my 94 ls400. That would save a bunch of bucks.
Anyone know if this is the case?
thanks in advance.
Anyone know if this is the case?
thanks in advance.
01-19-09 | 01:13 PM
#2
Driver
Joined: Nov 2004
Posts: 148
Likes: 1
From: California
yes it can be pressed out and in, in fact you can just place a socket of equal size or tad smaller and hammer it out,
heres for the tensioner pulley bearing # 6203 you got to get the sealed metal bearing code zz so its 6203zz about 6 bucks
for the idler pulley its # 6301zz for metal sealed bearing
theres also rubber sealed which is cheaper
heres for the tensioner pulley bearing # 6203 you got to get the sealed metal bearing code zz so its 6203zz about 6 bucks
for the idler pulley its # 6301zz for metal sealed bearing
theres also rubber sealed which is cheaper
01-20-09 | 06:30 PM
#4
Thread Starter
Driver School Candidate
Joined: Jan 2006
Posts: 8
Likes: 0
From: NC
yes it can be pressed out and in, in fact you can just place a socket of equal size or tad smaller and hammer it out,
heres for the tensioner pulley bearing # 6203 you got to get the sealed metal bearing code zz so its 6203zz about 6 bucks
for the idler pulley its # 6301zz for metal sealed bearing
theres also rubber sealed which is cheaper
heres for the tensioner pulley bearing # 6203 you got to get the sealed metal bearing code zz so its 6203zz about 6 bucks
for the idler pulley its # 6301zz for metal sealed bearing
theres also rubber sealed which is cheaper
Thread
Thread Starter
Forum
Replies
Last Post
dashan
LS - 1st and 2nd Gen (1990-2000)
21
03-10-18 03:25 PM
