LS 400 questions
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2002
Location: Massachusetts
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
LS 400 questions
OK, I changed the oil a couple of days ago. The next day when I started the car, the engine light and the trac light was on. I had to disconnect the battery in order to clear the computer. I did the oil myself. I did not touch anything and certainly there is no leak at all. Do I have to clear the computer every time I am doing some sort of work on the car? Also, does anyone know if there is a computer (affordable) that I can buy so I can read the codes of the engine? And as last, I will replace the brake rotors in the near future and I want to install cross drilled. Does anyone have any good recommendations? '92 LS 400. Thanks.
#2
NO YOU SHOULDN'T HAVE TO
I change my oil all the time , 91 LS and never have a problem.
There's a sequence to get the engine codes , but I'll have to look
to find it or if someone have a manual they can help you out ?
There's a web site also to order cross drilled slotted rotor's but again I'll have to look for it I think they were 120 ea.
You can e-mail me if you like.
There's a sequence to get the engine codes , but I'll have to look
to find it or if someone have a manual they can help you out ?
There's a web site also to order cross drilled slotted rotor's but again I'll have to look for it I think they were 120 ea.
You can e-mail me if you like.
#3
Hey Bobby , here's the site for croos drilled rotors
They on sale !!
http://www.optauto.com/webstore/prod...=yes&dept=1526
They on sale !!
http://www.optauto.com/webstore/prod...=yes&dept=1526
#4
Re: LS 400 questions
Originally posted by Bobby K
Also, does anyone know if there is a computer (affordable) that I can buy so I can read the codes of the engine?
Also, does anyone know if there is a computer (affordable) that I can buy so I can read the codes of the engine?
Thread
Thread Starter
Forum
Replies
Last Post
badfish667
LS - 1st and 2nd Gen (1990-2000)
7
05-17-15 05:02 PM