91LS Master Cylinder
#1
Lexus Test Driver
Thread Starter
91LS Master Cylinder
Hi Guys,
Rock Auto had a good deal on some LS400 parts inventory so I picked up a brand new master cylinder for my 91 for around $90... I've had inconsitent pedal feel sometimes, but consistently, it takes a lot of foot pressure to stop and its almost impossible to get the ABS to kick in.
I know I have to bench bleed it before installing, then bleed all four corners...
Just wondering what to expect after removing the three master cylinder bolts from the brake booster. The back of the master cylinder looks like it would just accept a rounded rod that would slide into the center of it from the booster. Is it as simple as that? Any pointers from someone that's done this would be appreciated.
Thanks
Rock Auto had a good deal on some LS400 parts inventory so I picked up a brand new master cylinder for my 91 for around $90... I've had inconsitent pedal feel sometimes, but consistently, it takes a lot of foot pressure to stop and its almost impossible to get the ABS to kick in.
I know I have to bench bleed it before installing, then bleed all four corners...
Just wondering what to expect after removing the three master cylinder bolts from the brake booster. The back of the master cylinder looks like it would just accept a rounded rod that would slide into the center of it from the booster. Is it as simple as that? Any pointers from someone that's done this would be appreciated.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
qha_vn
LS - 1st and 2nd Gen (1990-2000)
2
04-04-16 05:57 PM
bloodyKnuc
GS - 1st Gen (1993-1997)
1
11-18-15 12:00 PM