Megan EZ's on UCF20/UCF21
#5
i believe the EZ are based on the same design as the LP, without the 32-way adjustability (same spring rates, perch design, collars, etc). they will go low, but like the LP, you will need to mess with the preload to go lower (at least to tuck tires you do). good luck!
#7
dont mean to brag or anything.. but to any who doubted the megan ez's. just slapped the fronts on today and i still have 3 inches left of thread left to go lower! i can't even drive like this.. so i gotta raise it back up. only thing that should be doubted if anything is the ride quality on these. didnt have a chance to drive it out yet, but i'll be running full stiffness. here are some pics for the meantime..
on stock 98-00 wheels , can't even turn.. fat tires ftl
alot better.. stock 3gs wheels, low profile and stretched. i'm literally less than half an inch off the ground, underpanels scraping.
professional shots after everything is finished!
on stock 98-00 wheels , can't even turn.. fat tires ftl
alot better.. stock 3gs wheels, low profile and stretched. i'm literally less than half an inch off the ground, underpanels scraping.
professional shots after everything is finished!
Trending Topics
#9
^LOL, i know, its retarded right? my cousin originally let his friend borrow these stock wheels for his gs400. my friend wasn't satisfied with the big tirewall since he wanted to be slammed. so he just picked up low profile tires and stretched in case he needed it. the gs350 rims are 18x8.. so that's why i'm sunken in alot. i'll probably throw some spacers on in the future.
#12
dont mean to brag or anything.. but to any who doubted the megan ez's. just slapped the fronts on today and i still have 3 inches left of thread left to go lower! i can't even drive like this.. so i gotta raise it back up. only thing that should be doubted if anything is the ride quality on these. didnt have a chance to drive it out yet, but i'll be running full stiffness. here are some pics for the meantime..
on stock 98-00 wheels , can't even turn.. fat tires ftl
on stock 98-00 wheels , can't even turn.. fat tires ftl
I dunno how it is on the 20, but I'm sure it cant be much different, but if you go too low in the front the upper A arms will hit the shock tower.
but it looks awesome, wish I was able to find a ucf20!
#13
we'll see about the rears. i've always thought it was vice versa where the fronts would be higher than the rears. did you accidentally put the fronts in the rear/rear in the fronts? cause they bolt exactly the same way for fronts and rears. make sure the higher spring rate goes in the front.
#14
we'll see about the rears. i've always thought it was vice versa where the fronts would be higher than the rears. did you accidentally put the fronts in the rear/rear in the fronts? cause they bolt exactly the same way for fronts and rears. make sure the higher spring rate goes in the front.
#15
Lexus Champion
iTrader: (24)
Post a daytime pic if you can. I dont know any UCF20 that low on coils, with their front bumper 0.5" off the ground. Hell i'm not even that low
And tucking rim on factory 16's?