LS400 climate LCD dead. What temp am I at?
#1
Rookie
Thread Starter
Join Date: Nov 2011
Location: New Brunswick
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My 1992 climate control LCD is dead. I'm going to get it fixed sometime soon from one of the shops on ebay.
If I push my temp decrease button until it stops beeping, it stops at some low temp setting. And I know I can then push my temp increase button, and raise my setting in 1/2 degree steps.
But where am I starting at? What is my low temp? (I got my LS400 in this condition. I never knew the low set point, and can't find it in my manuals.)
Help - from you who can still read your climate setting!
If I push my temp decrease button until it stops beeping, it stops at some low temp setting. And I know I can then push my temp increase button, and raise my setting in 1/2 degree steps.
But where am I starting at? What is my low temp? (I got my LS400 in this condition. I never knew the low set point, and can't find it in my manuals.)
Help - from you who can still read your climate setting!
#6
Rookie
Thread Starter
Join Date: Nov 2011
Location: New Brunswick
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
You're close. Absolute low is "MAX cold" and then one up is 65*. Absolute high is "MAX hot" and then one down is 85*. The fan works different on MAX hot or cold. And it does go in full degree incriments. I'm not sure if it would be in Celcius, but if it is I doubt that it would raise, or lower in half degree incriments.
This is the way to do it b/c the actual temp reading doesn't matter, it's all about how warm, or cool, you feel.
This is the way to do it b/c the actual temp reading doesn't matter, it's all about how warm, or cool, you feel.
Thread
Thread Starter
Forum
Replies
Last Post
CRybicki15
LS - 1st and 2nd Gen (1990-2000)
0
08-04-17 04:17 PM
RastaPasta
LS - 1st and 2nd Gen (1990-2000)
5
10-02-12 07:20 PM