help...bought a set of 19x10.5 +5/19x11.5 +10
#16
#18
You need to make sure it's very clean in there before you roll it. Any dirt or debris can cause dimples if you do a complete flat roll and or start to pull. Thinner the metal more likely it is to dimple. I've probably roller 30-35 different cars and have never had a dimple. I spent a few minutes though and clean it really well first.
#19
You need to make sure it's very clean in there before you roll it. Any dirt or debris can cause dimples if you do a complete flat roll and or start to pull. Thinner the metal more likely it is to dimple. I've probably roller 30-35 different cars and have never had a dimple. I spent a few minutes though and clean it really well first.
#20
You can shave down just past the square hole and itll leave you with just enough metal to roll the fender with. Heres a thread:
http://www.wrongfitmentcrew.com/foru...dimple-reducer)
http://www.wrongfitmentcrew.com/foru...dimple-reducer)
Thread
Thread Starter
Forum
Replies
Last Post