Studio 2.1 Camber Adapters Installed
#16
Pole Position
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: MN
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
^^^man, we'll have to talk sometime because I want to run a more flush setup up front, but I'm worried I won't be able to turn. Are you running the Studio pieces in the rear as well? I need to camber my rears more.
Also, how much life do you get out of your tires? :X I just got an alignment today and new tires yesterday.
Also, how much life do you get out of your tires? :X I just got an alignment today and new tires yesterday.
#17
Lead Lap
iTrader: (1)
i been on the same 3/4 of the tires since November when i drove down to SD for a VIP meet. my rear driver tire got 2 nails in it in a week back to back so i had to throw something fresh on there. In the rears im running STUDIO RUCAs, Toe links and Trac Links. sitting at -15ish camber.
#18
Pole Position
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: MN
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
good to know man, gives me some peace-of-mind that I can daily this and not buy 3-4 sets of tires for the year
I'm going to be getting the Studio rear LCAs and look into the toe-links and track links for the front. If I get some decent life out of my tires, I'm going to push for -10 all around (-7.2 up front and -4 in the rear since the rear is still high). Your car is definitely the inspiration.
I'm going to be getting the Studio rear LCAs and look into the toe-links and track links for the front. If I get some decent life out of my tires, I'm going to push for -10 all around (-7.2 up front and -4 in the rear since the rear is still high). Your car is definitely the inspiration.
#19
Moderator
iTrader: (7)
good to know man, gives me some peace-of-mind that I can daily this and not buy 3-4 sets of tires for the year
I'm going to be getting the Studio rear LCAs and look into the toe-links and track links for the front. If I get some decent life out of my tires, I'm going to push for -10 all around (-7.2 up front and -4 in the rear since the rear is still high). Your car is definitely the inspiration.
I'm going to be getting the Studio rear LCAs and look into the toe-links and track links for the front. If I get some decent life out of my tires, I'm going to push for -10 all around (-7.2 up front and -4 in the rear since the rear is still high). Your car is definitely the inspiration.
#20
BahHumBug
iTrader: (10)
no, you're right... lol.
they don't really make rear "RCA"s but they do sell (in jp anyways) SS kits which relocate the shock inwards and down ~1" but they're designed for cars with factory AS to go lower, pretty much useless on anything with threaded coilovers as you can't correct the rear suspension geometry by moving the shock.
they don't really make rear "RCA"s but they do sell (in jp anyways) SS kits which relocate the shock inwards and down ~1" but they're designed for cars with factory AS to go lower, pretty much useless on anything with threaded coilovers as you can't correct the rear suspension geometry by moving the shock.
#27
looks pretty sick but not for me i'm poor so changing tires on a big wheel every so often because of uneven wear would suck, i wonder if it's functional lol when is the club lexus autocross?
#28
Driver School Candidate
iTrader: (1)
Join Date: Dec 2009
Location: md
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
looks good by the way.. I have a question, where are you guys finding or buying the studio front rca camber plates ? i cant find them anywhere and am in dieing need of a set for my ucf21..
Bold-move.com is no longer a web site...
Thanks Jorge
Bold-move.com is no longer a web site...
Thanks Jorge
Thread
Thread Starter
Forum
Replies
Last Post
Rymag
GS - 2nd Gen (1998-2005)
16
07-23-12 09:39 AM
melski415
Northern California Lexus Club
6
03-25-12 12:25 AM
S2dannyKeo
GS - 2nd Gen (1998-2005)
1
03-23-12 11:11 PM
lexusscturbo
Suspension and Brakes
18
01-28-09 01:13 PM