Any vender selling complete interior LED and license plate conversion kit.
#1
Any vender selling complete interior LED and license plate conversion kit.
I have a 99 ls400 wanted to know any vender on here who has a kit put together already for LED interior bulbs and lisence plate? Thanks
#2
http://www.superbrightleds.com
This is where i bought all of my LEDs, You have to figure out which ones and how many you actually need.
This is where i bought all of my LEDs, You have to figure out which ones and how many you actually need.
#3
http://www.superbrightleds.com
This is where i bought all of my LEDs, You have to figure out which ones and how many you actually need.
This is where i bought all of my LEDs, You have to figure out which ones and how many you actually need.
#4
I don't think there is someone here who is selling a whole kit ready packaged. But here is a list of the appropriate bulbs and location that i used when I did my conversion.
-UCF20/21 Interior Lighting Specifications
Quote:
2 x #74 for footwells
1 x #74 for ignition cylinder (led will need some sanding to fit right)
1 x #74 for glovebox
4 x #194 for doorlights
4 x #194 for rear maplights(on C pillar)+rear door dome lights
2 x #194 for front corner markers (*921 & 2825 are wattage options)
2 x #194 for rear license plate lights
1 x #194 for trunk interior light (do the neon conversion, MUCH better light output than any 194 bulb or LED)
2 x BA9 for front maplights
2 x BA9 for rear maplights
1 x 31mm dome light
2 x 7440 for Rear Turn Signals
4 x 7443 for Rear Brake Lights
2 x 7440 for Reverse Lights
1998-2000 Specific:
2 x 9005 for High Beams
2 x 9006 for Fog Lights
2 x D2R for Low Beams (HID-Equipped cars only)
2 x 9006 for Low Beams (non-HID cars only)
2 x 7440 for Front Turn Signals
4 x 2825 for Front/Rear Side Markers
1995-1997 Specific:
2 x 9005 for High Beams
2 x 9003 for Low Beams
2 x 9006 for Fog Lights
2 x 1156 for Front Turn Signals
-UCF20/21 Interior Lighting Specifications
Quote:
2 x #74 for footwells
1 x #74 for ignition cylinder (led will need some sanding to fit right)
1 x #74 for glovebox
4 x #194 for doorlights
4 x #194 for rear maplights(on C pillar)+rear door dome lights
2 x #194 for front corner markers (*921 & 2825 are wattage options)
2 x #194 for rear license plate lights
1 x #194 for trunk interior light (do the neon conversion, MUCH better light output than any 194 bulb or LED)
2 x BA9 for front maplights
2 x BA9 for rear maplights
1 x 31mm dome light
2 x 7440 for Rear Turn Signals
4 x 7443 for Rear Brake Lights
2 x 7440 for Reverse Lights
1998-2000 Specific:
2 x 9005 for High Beams
2 x 9006 for Fog Lights
2 x D2R for Low Beams (HID-Equipped cars only)
2 x 9006 for Low Beams (non-HID cars only)
2 x 7440 for Front Turn Signals
4 x 2825 for Front/Rear Side Markers
1995-1997 Specific:
2 x 9005 for High Beams
2 x 9003 for Low Beams
2 x 9006 for Fog Lights
2 x 1156 for Front Turn Signals
#6
where in ca are you? i remember searching through craigslist and found someone selling a kit but that was local to me. i really think it's best to just piece it all together.
i used http://www.vleds.com.
i used http://www.vleds.com.
#7
where in ca are you? i remember searching through craigslist and found someone selling a kit but that was local to me. i really think it's best to just piece it all together.
i used http://www.vleds.com.
i used http://www.vleds.com.
Thread
Thread Starter
Forum
Replies
Last Post