2000 LS Foglight mod. (hid)
#16
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
We cant mount the projector with all this extra meat.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_172600.jpg)
So here it is. After this step your fogs will never hold a 9006 bulb again.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_175356.jpg)
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_175420.jpg)
I trimed this down a little to make room for the Bi-Xenon solenoid wires.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_180249.jpg)
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_180446.jpg)
Now the projector is in the way of the two screws, so you will need to rotate the projector a bit to get to the holes.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_181134.jpg)
make sure you test everything before you put it all back together.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_183341.jpg)
Hi beam
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_183414.jpg)
I got a brick of adhesive. Ill probably do my headlights in the winter so i figured ill get a brick.
A heat knife would work great for this, but I used a razor blade.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_183622.jpg)
I added some to some spots that look like they could use some extra.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_184834.jpg)
Now heat the housing nice and easy and press the lens back on.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_185401.jpg)
Dont forget that first screw you took off. that will hold the lens on pretty good.
I ordered a rubber cap to seal off the back.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_190809.jpg)
I added some shoe goo (had it in the closet) figured its good enough to hold work boots together so it should work for this.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_191514.jpg)
all sealed up.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_172600.jpg)
So here it is. After this step your fogs will never hold a 9006 bulb again.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_175356.jpg)
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_175420.jpg)
I trimed this down a little to make room for the Bi-Xenon solenoid wires.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_180249.jpg)
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_180446.jpg)
Now the projector is in the way of the two screws, so you will need to rotate the projector a bit to get to the holes.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_181134.jpg)
make sure you test everything before you put it all back together.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_183341.jpg)
Hi beam
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_183414.jpg)
I got a brick of adhesive. Ill probably do my headlights in the winter so i figured ill get a brick.
A heat knife would work great for this, but I used a razor blade.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_183622.jpg)
I added some to some spots that look like they could use some extra.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_184834.jpg)
Now heat the housing nice and easy and press the lens back on.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_185401.jpg)
Dont forget that first screw you took off. that will hold the lens on pretty good.
I ordered a rubber cap to seal off the back.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_190809.jpg)
I added some shoe goo (had it in the closet) figured its good enough to hold work boots together so it should work for this.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_191514.jpg)
all sealed up.
![](http://i840.photobucket.com/albums/zz328/Rhansen1987/Mobile%20Uploads/20140703_191756.jpg)
Thread
Thread Starter
Forum
Replies
Last Post