97 ls400 will not start and has no codes.
#16
Driver School Candidate
Thread Starter
Join Date: Jul 2018
Location: TX
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Yamae, I replaced both cam sensors and had the same result. I also found a slit in the intake tube after the map sensor and repaired it, thinking that too much air was entering the intake and overwhelming the system. But to no avail. I will check the timing belt and post my findings. Thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
jayjw
LS - 1st and 2nd Gen (1990-2000)
17
11-04-19 05:34 PM
AkumaUCF10
LS - 1st and 2nd Gen (1990-2000)
11
05-17-18 09:32 AM
Viper1
LS - 1st and 2nd Gen (1990-2000)
29
12-27-15 11:12 AM