Jjkruse

Okay so I tested the black/white wire on the ignition switch and it does have power when attempting to crank, however I took apart the fuse block under the hood to test the wires to the starter relay. I found some interesting stuff in there, I can post a picture tomorrow but there’s a few wires that plug into the bottom of the fuse block for the starter relay and others in that little area that look toasty or completely melted. Also when I unplugged that section of the fuse block the lights for the speedo and tach came on which were not on before when the ignition is turned. I’m not sure where to go from here.