POST PICS OF 20's on your LS430
The following users liked this post:
ntts (11-29-21)
The following users liked this post:
ntts (11-29-21)
The following 2 users liked this post by Hacc:
alexbedoya (12-19-22),
Boomin (03-08-22)
#1069
Driver School Candidate
2004 LS430 Briarwood Pearl on stock 17"
Picked this up 2 weeks ago. One owner, 175k miles, everything works and runs flawlessly (except the woofers in rear deck and front doors which are being replaced soon).
Any love for the 17" Mercedes look alike wheels? The seller just installed new tires so I'm torn on what to do but also, I'm digging the look.
Any love for the 17" Mercedes look alike wheels? The seller just installed new tires so I'm torn on what to do but also, I'm digging the look.
Last edited by bjchilds1; 12-16-21 at 04:13 PM.
The following users liked this post:
Clipz808 (11-29-21)
#1070
Driver School Candidate
How do I fit 20s with low offset with huge stock calipers?
Kinda newbie so forgive me but with stock 18s, it looks like there’s no room for the face of a rim to be pushed back anywhere with a caliper that big behind it. So how do people throw there’s deep dish, 10.5 inch wide wheels on their LS430’s?? Do I have to get new brake calipers and rotors? Buy aftermarket, shorter control arms maybe? Change suspensions? Not really sure where to begin so any help would be appreciated
The following users liked this post:
sypherjak (01-09-22)
The following users liked this post:
Esjay (09-06-22)
#1073
Instructor
iTrader: (37)
Kinda newbie so forgive me but with stock 18s, it looks like there’s no room for the face of a rim to be pushed back anywhere with a caliper that big behind it. So how do people throw there’s deep dish, 10.5 inch wide wheels on their LS430’s?? Do I have to get new brake calipers and rotors? Buy aftermarket, shorter control arms maybe? Change suspensions? Not really sure where to begin so any help would be appreciated
#1075
Kinda newbie so forgive me but with stock 18s, it looks like there’s no room for the face of a rim to be pushed back anywhere with a caliper that big behind it. So how do people throw there’s deep dish, 10.5 inch wide wheels on their LS430’s?? Do I have to get new brake calipers and rotors? Buy aftermarket, shorter control arms maybe? Change suspensions? Not really sure where to begin so any help would be appreciated
#1076
2006 Lexus Ls430 UL
20 inch Work Zeast St1 With Complete Aimgain Body kit
For more pic follow me on Instagram @Fahad_ucf
Last edited by Hacc; 01-10-22 at 09:19 PM. Reason: forgot to add more info
The following users liked this post:
EBLS430 (10-11-22)
#1077
For those who are lowered what coilovers do you use ? And how did you fit wheels?
my 20s rub already at stock suspension. I wanna tuck the wheels a little but worried about rubbing. Does it ride better on a set of coils vs stock?
my 20s rub already at stock suspension. I wanna tuck the wheels a little but worried about rubbing. Does it ride better on a set of coils vs stock?
#1078
If you're rubbing at stock height it won't get better if you go lower
#1079
never ran a car with coilovers so wasn't sure what difference it would make, would like to lower it a little if possible. Tucking would be nice, i mostly rub on the fenders cause of the spacers. Not sure much about wheel specs and what to get to do that
Last edited by teaa; 01-27-22 at 10:06 AM.
#1080
245/40r20 tire specs. my only issue is really the back rubbing when i hit bumps/ramps. i'm running 15mm spacers in the back which definitely adds unnecessary rubbing (just did it to match the front 15mm spacers needed to clear the calipers). but I feel i'll still rub without
never ran a car with coilovers so wasn't sure what difference it would make, would like to lower it a little if possible. Tucking would be nice, i mostly rub on the fenders cause of the spacers. Not sure much about wheel specs and what to get to do that
never ran a car with coilovers so wasn't sure what difference it would make, would like to lower it a little if possible. Tucking would be nice, i mostly rub on the fenders cause of the spacers. Not sure much about wheel specs and what to get to do that
Post some pics to show how your wheels sit and where they rub