When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's kind of hard for me to go into full detail, i'll have to pull out the fuse box again to give yall the exact color wires. But i went into the fuse box by the driver side headlight and found the foglamp fuse, i cut the wire that feeds the foglamps and spliced it into the park lamp wires. each foglamp has a different wire. I still didn't figure out how to do this and still be able to work the foglights with the inside switch. With this method once you turn on the park lights the fogs remain on, the switch will not work. I'll soon figure it out..
I did a write up about this when I did my LS400 (in the LS400 forum). I also did on my GS430. The key to keeping the operation of your switch is to wire from the switch to the relay, and then I connected it to my parking light switch. So that BOTH need to be on for the fogs to operate.
On the ls430 i cant find the wire that goes from the switch to the relay. i dont know how they have it wired but with the test light theres no wire with signal.
On the ls430 i cant find the wire that goes from the switch to the relay. i dont know how they have it wired but with the test light theres no wire with signal.
I wired one myself. Its much easier that way, takes about 20mins.
i wanted to do the same to my 99 sc. do anyone know the how? how to re-wire the fogs to park lights and still switch operation on the sc? btw sorry for thread jacking.