wheel choices
#18
Pole Position
The first one, no doubt
#19
First for the VIP look, second for a luxury sport look with chrome, the third is a sports look. For the second and third, you may want to dress up the brake calipers, otherwise it looks incomplete.
#22
Lexus Champion
To be honest I like none of them.. Don't get me wrong I love HRE wheels and wish my pocket book could swing a set but I would go with a MESH 540R or 549R with many fine blades. Still think thou the full face wheel is the way to go on the LS for the VIP look that this car deserves but thats my 2 cents take it for what its worth. Best of luck with your choice and let us know what you decide.
#23
Yeah, I know, my first few choices of wheels were full face designs. But I'm not so sure I want that look anymore after looking at other wheels. I may also not get the the HRE's anymore after being talked out of it by a few people. Anyway I will keep looking for a nice set of five spokes. Thanks
#25
Former Sponsor
Join Date: Jan 2003
Location: D2'sville
Posts: 13,002
Likes: 0
Received 0 Likes
on
0 Posts
Of the three you posted, I would go with the 995R, it at least has some faceting and beveled edges to give it some detail.
If I were makign LS430 suggestions, I'd go
MODULARE M7 or AICONA ALC35 for 5spokers
MODULARE M3 for in between
ZONE 8 or 10 for multispoke
AUTOCOUTURE MAGNIGIFIQUE or WORK D3S for dish face
Happy Hunting!!
MODULARE M7
AICONA ALC35
MODULARE M3
ZONE 8
ZONE 10
AUTOCOUTURE MAGNIFIQUE
VARIANZA D3S
If I were makign LS430 suggestions, I'd go
MODULARE M7 or AICONA ALC35 for 5spokers
MODULARE M3 for in between
ZONE 8 or 10 for multispoke
AUTOCOUTURE MAGNIGIFIQUE or WORK D3S for dish face
Happy Hunting!!
MODULARE M7
AICONA ALC35
MODULARE M3
ZONE 8
ZONE 10
AUTOCOUTURE MAGNIFIQUE
VARIANZA D3S
#27
Driver School Candidate
Diggin the second
The second wheel looks like what a lot of BMW 6 run here in Miami. I like 'em!
What about widths? The width makes a difference too!
2 shops have told me there is suspension interference with 10" rears and 9" fronts. Any experiences with needing to roll the fenders in the rear or interference in the front for different widths?
Gotta have 'em wide enough!
What about widths? The width makes a difference too!
2 shops have told me there is suspension interference with 10" rears and 9" fronts. Any experiences with needing to roll the fenders in the rear or interference in the front for different widths?
Gotta have 'em wide enough!
#29
Pole Position
iTrader: (1)
nice choices. of the three, i like the 940r series (2nd one) the best but i would go with the 7 spoke 944 or 948 rather than the 5 spoke 945. however, dish wheels like the 1st ones are always a safe bet with the LS. i have similar wald duch ii's on now and my car looks right. straight up jap mercedes. mesh is nice and all but save it for the supra. $0.02
Thread
Thread Starter
Forum
Replies
Last Post
TLW
Wheels, Tires & Brakes Forum
8
08-17-05 10:36 AM