deca1234

will 20x8.5 +20 and 20x10 +25 fit on our cars? if so how much mods will need to be done?

BIGGZ

for the rears,im sure youre gonna need to roll the fenders.and it all matters what tire size you plan on using and how low youre car is.
and the fronts should fit no problem.

GSoup

Front is fine but the rear you have to either shave the fenders or roll them.

blacksc400

iTrader: (4)

Yes, just shave the fender, put 245/35/20 in the rear.

deca1234

im lowered on tanabe springs, will 275/30 fit in the back? i asked because i have these lying around.

JDMUSCLE

iTrader: (1)

Soo...what is the perfect offset for these cars...clear the brakes and sit flush with the fenders?

bonafyd

iTrader: (6)

it all depends on what size rims, suspension & tires your running..this all factors in to the equation when trying to get flush, since a car on springs/coilovers/SS kit are gonna sit different compared to a car on air.
getting that flush look/stance is what it's all about!!!

Good luck trying to get a straight up offset#

JDMUSCLE

iTrader: (1)

well my car is lowered with Tein CS and Im looking for 19 inch wheels...what do you think would work well with this combo...I really car for a wide wheel in the back...maybe 10 or 10.5 and 8 or 9 upfront, I wanna get the wheel that would not require any spacers upfront and no fender mods...any recommendations....thanks in advance for your help!!

BIGGZ

here,you can use my car as an example.this is with my height controller set on "L".the rear to me is flush but not hella flush.as for the front,its pretty weak.


tomorrow i'll reveal my specs,and i'll post pics of the fittment at my ride height.

JDMUSCLE

iTrader: (1)

Man, are those wheels for sale? Love the way they look on your car!!

Specs Please!!

BIGGZ

Thanks man.for sale?nope,these are the only wheels i have for this car.sadly.
alright.heres a pic of my ride height.

Front:19x9.5 +35


Rear:19x10.5 +24

for the ride height,i really like how flush the rear is and the front is'nt that bad also.keep in mind,the rear fenders were rolled flat and the fronts weren't touch at all.i hope that helps.

junjdm

man...i want those wheels in 20's!....but they are very pricey in 20's I heard...

JDMUSCLE

iTrader: (1)

Your car is one of the best looking Ls around man!! very classy and simple!! If you dont mind, I would like to know how much you paid for these wheels and where did you get them from? Around here in NY there arent too many shops that serve the VIP crowd!!

BIGGZ

Well i cant really say how much i got the wheels.only because it was on the car already when i bought it.thanks!

REV-01

iTrader: (13)

^1bigjzs147 please check pm on the correct specs of these wheels.

the one you posted it is not correct.