Everyone who has a UL, please read this
#61
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
so i'm about to buy an 05 ul ls430 hopefully on monday mainly to slap on an air data systems controller thing to make it sit all pretty like, now i'm curious if the asus controller thing is actually bad for the car since its pretty much a 100% aftermarket part and all. i really wanted to keep this lexus close to stock except for like the grill, tint, lights, sub + amp n what not. what kinds of negative issues would i possibly be looking at because i can ill afford to replace the struts at 1000/ a piece in the near term???
The good thing is, if it does act funny, you can always unplug it to go back to stock, no one said it actually did any damage to the car.
Unless you want to put the car on the ground or move it up and down to an extreme level in a regular basis, you don't need the controller. Sounds like you just want to lower it and leave it, like I am. All I did was adjusted the height sensor rod and call it a day. It sit low enough to look good and it is 100% stock reliable. You can actually slam it down pretty low if you cut the rod.
#62
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
well i think that for less than a grand (hopefully half of a grand), and the ability to just put it back to normal with the press of a button or return to stock by just unplugging is well worth the cost.
Ideally I would like to be able to put the car on the wheels (L) whenever i turn it off and raise it up to a nice low but still drivable setting (maybe like 6 or 7) when ever i start the car up and try to drive. Not sure how feasible this is but from what i can tell the data systems controller (asc680 thing) seems to be what most people go with.
Ideally I would like to be able to put the car on the wheels (L) whenever i turn it off and raise it up to a nice low but still drivable setting (maybe like 6 or 7) when ever i start the car up and try to drive. Not sure how feasible this is but from what i can tell the data systems controller (asc680 thing) seems to be what most people go with.
#64
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
this is what i thought too, but i read that someone on here says that its safe to have it be going up or down while driving...? is this true and what if you hit a bump while it is going up or down???
#65
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
For the datacontroller speed. If you are driving mid height, say 5, the time it takes to drop all the way is faster, like 2min or so. Same goes if you are dropped to L, then to a 5 driving height.
Now, if you are talking normal height to "L", yes, it does take 5 minutes for the full drop. Note: I've heard that you should not turn off your engine while the datasystem controller is adjusting your height. I followed this rule and never had any issues with it adjusting on its own or lobsided settings.
Now, if you are talking normal height to "L", yes, it does take 5 minutes for the full drop. Note: I've heard that you should not turn off your engine while the datasystem controller is adjusting your height. I followed this rule and never had any issues with it adjusting on its own or lobsided settings.
#68
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
The car does not adjust with engine turned off but it would make sense not to turn car off whiles its doing the adjustment as its sending a command to the car and if you cut power off while its in that operation, it may not remember when you turn the car back on.
#69
Driver School Candidate
Join Date: Jan 2009
Location: NV
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
#70
Pole Position
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
not a good idea. sometimes the car lowers past the set low ride height (must be the downforce or the auto-lowering-at-high-speeds function) and the wheels will tuck so much that the inner tire will rub against the strut causing sidewall separation of the tires. and im defiantly fastbagging once the shocks expire if i have to dump 4 dimes anyway
#71
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
since i am having a hard time finding a decent priced datasystem controller i am reconsidering using the instructions (i think airtime put them up) to just lower the car by the sensors to a nice lowered driving stance like say the equivalent of like a 5-7 (not sure which would be a nice safe lowered setting) and then when i need it up higher just hitting the high switch on the inside of the car. any idea if this is a smart idea or not??
if i lower the sensors to a low driving height that is still functional for most roads and then if i hit the high button on the inside of the car what will happen exactly? how high will the car go??
if i lower the sensors to a low driving height that is still functional for most roads and then if i hit the high button on the inside of the car what will happen exactly? how high will the car go??
#73
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
i saw a diy from airtime on the faq page here but airtime didn't know if the fronts should be lifted up when adjusting or pulled down (when trying to lower it)? i really want to do mines like this weekend, but i am scared that it won't be even on all 4 corners. how easy and fool proof was this process?? should i just put a little notch for where they were positioned stock then just loosen the nut and slide the things down a little?? what did you do??
#74
Lead Lap
iTrader: (1)
Join Date: Nov 2006
Location: JP (oki to be precise :D)
Posts: 4,918
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
alright so i just studied airtimes instructions and feel like it makes pretty good sense, but i have a question still. if i crawl underneath the back and make the adjustments, turn the car on and see it lower, can i then crawl back underneath the car to make smaller adjustments if it is all the way dropped by lowering the sensor bar or will the car be to low to get underneath it at this point.
by lowering the rear sensor bars all the way down, and by turning the front bars all the way to the lowering side, how low will this make the car, and can you still drive easily like this?? can you still crawl under the car at this height in the rear or do you have to get it up in the air??
by lowering the rear sensor bars all the way down, and by turning the front bars all the way to the lowering side, how low will this make the car, and can you still drive easily like this?? can you still crawl under the car at this height in the rear or do you have to get it up in the air??
#75
Lexus Champion
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I am planning to go aftermarket.
Either cheap way is to get Tein CS and say "bye-bye" to Air.
Or I will get some from this company. www.air-zenith.com
I talked to the president in person, and he can get a whole set for me for cheap.![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
Either cheap way is to get Tein CS and say "bye-bye" to Air.
Or I will get some from this company. www.air-zenith.com
I talked to the president in person, and he can get a whole set for me for cheap.
![Big Grin](https://www.clublexus.com/forums/images/smilies/biggrin.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)