ancdmd

I have accelerated wear on the outside and inside edges of my tires, have previously been maintaining pressure at 30 psi. I noticed the wear and bumped it up to 34 psi. My mechanic suggested 40 psi. I have 20" wheels, 275 in back and 245 in front, although back tires really only have inside edge wear due to higher negative camber. Alignment has always been good. Thoughts?

airtime

I'm running 40psi in my 20". Thought that was standard ?

mikepae

iTrader: (1)

im at 40 too

JP2SEA

iTrader: (3)

I'm at 42psi on Falken 452.

ancdmd

Good to hear!

04_LS_430R

I'm getting good wear at 40PSI and the ride isn't harsh at all...

a13n0rma1

Inside AND outside tread wear?

Inside is usually camber, outside edge wear is usually a toe problem.

(back from the dead! Selling my WRX for an LS430 soon!)

Kyle Harty

iTrader: (17)

I keep mine at 38-40.

skperformance

iTrader: (6)

I run my 255/35 and 275/30 20 at 50 psi with toyo T1r's.
Toyo has a calculator or each car to set the psi to and it showed 42-45 for me and my sizes. I uped it a bit as tires are cheaper than wheels.