When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
im loving the all black look! especially the flat black, are you planning on getting wider wheels that sit more flush? i think that would finish the car off plus lowering it
If I go any wider, I'd have to make a wide body. All I have left on the wheel wells are the quarter panel skins. Had to cut the rest off. As far as lowering more, I'm thinking air ride. I dont wanna bounce down the road. I am 4 inches off the ground now, and it's difficult to clear a lot of the drive ways here. Some establishments I started avoiding all together, for the sake of keeping my bumper lol
Props for the innovation and fabrication.
I would suggest changing the caliper color if anything. Why bring attention to the one OEM part left? Now if they were Project Mu or Wilwood I would understand.
Inspiration?
The calipers were painted a couple years ago, when all I had was the wheels and drop. Yeah, I know the brakes on these cars suck, so until I change the wheels, I can't fit any bigger brakes. I had to shave maybe 1/4" off the corners of the calipers just to fit these wheels on here.
Props for the innovation and fabrication.
I would suggest changing the caliper color if anything. Why bring attention to the one OEM part left? Now if they were Project Mu or Wilwood I would understand.
Inspiration?
Inspiration was to make a kit to my liking with full bumpers. Since the only ones that exist are Junction Produce (to my knowledge) which stick out 12" behind the car like a bench. I didn't draw anything up going into it, just started cutting and testing different pieces, stepping away, looking, then cutting, moving, cutting... (abt a million times) but I was making it up as I go. The one thing I knew before I even started, was flat black and I wanted the wheel wells to wrap around the wheels.
Props for the innovation and fabrication.
I would suggest changing the caliper color if anything. Why bring attention to the one OEM part left? Now if they were Project Mu or Wilwood I would understand.