should i be worried
#2
That light comes on every 5k mi to remind you to get the car serviced. There's nothing actually wrong with it.
Btw, how do you get the compass to display on the lower center? I can only seem to get the outside temp there.
Btw, how do you get the compass to display on the lower center? I can only seem to get the outside temp there.
#6
#7
It does seem odd to have two lots of outside temp display on the one dashboard. I've often wondered why that part of the cluster isn't adjustable.
Display 2 only seems to change the size of the vehicle display on my radar nav setting. I've not yet found any other use for that switch.
Justin...
Display 2 only seems to change the size of the vehicle display on my radar nav setting. I've not yet found any other use for that switch.
Justin...
Trending Topics
#8
It does seem odd to have two lots of outside temp display on the one dashboard. I've often wondered why that part of the cluster isn't adjustable.
Display 2 only seems to change the size of the vehicle display on my radar nav setting. I've not yet found any other use for that switch.
Justin...
Display 2 only seems to change the size of the vehicle display on my radar nav setting. I've not yet found any other use for that switch.
Justin...
#9
Reset Maintenance Required Light
1. With your car OFF, place your key in the ignition and turn to ""On"". Do not start the car.
2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting).
3. Turn the key to OFF.
4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to ""On"".
5. Hold the odometer button in until the MAINT REQ light goes out...should take about 8-10 seconds.
1. With your car OFF, place your key in the ignition and turn to ""On"". Do not start the car.
2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting).
3. Turn the key to OFF.
4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to ""On"".
5. Hold the odometer button in until the MAINT REQ light goes out...should take about 8-10 seconds.
#10
As for the size of the vehicle display on the radar cruise display,that you can change using the disp2 button,but it has no other effect than making the picture bigger or smaller as far as I've seen so far.
Justin...
#11
You can't,you can only change the zoom on the map on the navi screen.
As for the size of the vehicle display on the radar cruise display,that you can change using the disp2 button,but it has no other effect than making the picture bigger or smaller as far as I've seen so far.
Justin...
As for the size of the vehicle display on the radar cruise display,that you can change using the disp2 button,but it has no other effect than making the picture bigger or smaller as far as I've seen so far.
Justin...
#12
lol - I was thinking the same thing. That "size of the car" is the following distance!
#15
Agree. I find the laser cruise is perfect for heavy freeway traffic. I realize that most people would think this was crazy, but it actually is a great help once you get used to it. When I drive a loaner without it, I am nearly lost in driving with a normal cruise.