Sway Bar Bushings?? I've searched and searched
#1
Sway Bar Bushings?? I've searched and searched
I took the LS to the Lexus dealership yesterday morning for an oil change and to have them give the car a once over, just to get their opinion on it.
I was told it's clean, no odd damage, and the only thing needing attention are the brakes, which I knew needed some work (I just bought 4 drilled rotors from R1Concepts and got the Ceramic pads as well)
The other item the Service Writer mentioned, was slight play in the "Swaybar bushings". I've looked through countless threads on rear sway bars, and Stabilizer links, but found nothing on replacing the bushings for the front stabilizer bar, or Sway Bar...
I did find the bushings on line, however...
Has anyone accomplished this task? I figured I'd do the links and bushings when I have the tires off to do the brakes.
Any help is much appreciated
I was told it's clean, no odd damage, and the only thing needing attention are the brakes, which I knew needed some work (I just bought 4 drilled rotors from R1Concepts and got the Ceramic pads as well)
The other item the Service Writer mentioned, was slight play in the "Swaybar bushings". I've looked through countless threads on rear sway bars, and Stabilizer links, but found nothing on replacing the bushings for the front stabilizer bar, or Sway Bar...
I did find the bushings on line, however...
Has anyone accomplished this task? I figured I'd do the links and bushings when I have the tires off to do the brakes.
Any help is much appreciated
#2
I would get a second opinion. Sounds like they may be just trying to generate more work. Sway bar bushing and links are not a common failure. To my knowledge, sway bar links will make popping sounds when going around a corner or when the car is leaning to one side or the other.
#3
When I told him I planned on doing my own brakes, he didn't seem to flinch, he simply said, that if you can handle the brakes on this car, then you can change out those bushings.
So, we'll see what it's like when I get it off the ground and pull the wheels.
Thanks for the info Lavrish...
The following users liked this post:
Fsport4lif (07-12-24)
#5
Get yourself a torque wrench if you don't have one. I went to Sears last night and got one to do by lower ball joint's right. It's really what makes for a proper service. Today was the first time I properly torqued all 4 wheels too. Don't know why I did not have one. At $40 it is well worth it for a 1/2 inch 150 lb Craftsman.
Last edited by Lavrishevo; 12-27-14 at 03:40 PM.
#6
#7
I took the LS to the Lexus dealership yesterday morning for an oil change and to have them give the car a once over, just to get their opinion on it.
I was told it's clean, no odd damage, and the only thing needing attention are the brakes, which I knew needed some work (I just bought 4 drilled rotors from R1Concepts and got the Ceramic pads as well)
The other item the Service Writer mentioned, was slight play in the "Swaybar bushings". I've looked through countless threads on rear sway bars, and Stabilizer links, but found nothing on replacing the bushings for the front stabilizer bar, or Sway Bar...
I did find the bushings on line, however...
Has anyone accomplished this task? I figured I'd do the links and bushings when I have the tires off to do the brakes.
Any help is much appreciated
I was told it's clean, no odd damage, and the only thing needing attention are the brakes, which I knew needed some work (I just bought 4 drilled rotors from R1Concepts and got the Ceramic pads as well)
The other item the Service Writer mentioned, was slight play in the "Swaybar bushings". I've looked through countless threads on rear sway bars, and Stabilizer links, but found nothing on replacing the bushings for the front stabilizer bar, or Sway Bar...
I did find the bushings on line, however...
Has anyone accomplished this task? I figured I'd do the links and bushings when I have the tires off to do the brakes.
Any help is much appreciated
On your brake job, when you replace the caliper bolts with new, do NOT be tempted to put any lubricant on the long bolt threads. Not only will your torque reading be incorrect, you may strip the aluminum threads of the caliper.
Trending Topics
#8
@Lavirsh:
I have a torque wrench, and yes it comes in handy. Thanks for the reminder. I had no idea there were as many Aluminum parts on this thing as there are.
@RKW: Thanks for the diagram on the brake set up. Fantastic info there. I'll have to hit up Sewell for those bolts today. I'm planning on swapping the rotors/pads next Thursday..
@Tom57: Thanks for the info on those bushings. Right now, I don't feel any loosness in the car, but I havn't driven it much at all, and the only thing I have to compare it to is my RX, which I replaced the struts and stabilizer links during the summer. Much stiffer ride, obviously..
I'm assuming the rotors are held in place with a couple set screws? Or is there something more that holds them on the hub?
I have a torque wrench, and yes it comes in handy. Thanks for the reminder. I had no idea there were as many Aluminum parts on this thing as there are.
@RKW: Thanks for the diagram on the brake set up. Fantastic info there. I'll have to hit up Sewell for those bolts today. I'm planning on swapping the rotors/pads next Thursday..
@Tom57: Thanks for the info on those bushings. Right now, I don't feel any loosness in the car, but I havn't driven it much at all, and the only thing I have to compare it to is my RX, which I replaced the struts and stabilizer links during the summer. Much stiffer ride, obviously..
I'm assuming the rotors are held in place with a couple set screws? Or is there something more that holds them on the hub?
#9
I don't recall seeing set screws - the rotor is basically sandwiched between the hub and wheel and held together with the lug nuts. Don't forget to follow manufacturer's "bedding-in" procedures for the new rotors.
#10
Got it... Living in the city, it can be a little difficult to find an open stretch of road to warm up the pads without stopping, but I'll try...
#11
Found out the diameter of your sway bar. If they are the same as my Fsport bar you can have my new never mounted oem bushings for free. I ordered new poly bushings from www.shopfigs.com along with some other items. Just pm me if they are the same diameter 19 mm.
http://shopfigs.com/v1/index.php?route=product/category&path=44
http://shopfigs.com/v1/index.php?route=product/category&path=44
#12
Replacing the sway bar bushings is one of the easier DIY projects I've done. I ordered the bushings from Sewell Lexus for about $20. Raise the front end and find the sway bar. Locate the two bushings mounted on right and left sides of the bar. Remove the brackets holding the bushings (two bolts) and remove the bushing(s). Liberally apply silicone grease to the new bushings and install in reverse order. I was having an annoying creaking, pop sound when braking that went away when the bushings were replaced. The is a 20-30 minute task.
The following users liked this post:
eclipse641 (10-13-20)
#13
Found out the diameter of your sway bar. If they are the same as my Fsport bar you can have my new never mounted oem bushings for free. I ordered new poly bushings from www.shopfigs.com along with some other items. Just pm me if they are the same diameter 19 mm.
http://shopfigs.com/v1/index.php?rou...tegory&path=44
http://shopfigs.com/v1/index.php?rou...tegory&path=44
Much appreciated.
#14
Replacing the sway bar bushings is one of the easier DIY projects I've done. I ordered the bushings from Sewell Lexus for about $20. Raise the front end and find the sway bar. Locate the two bushings mounted on right and left sides of the bar. Remove the brackets holding the bushings (two bolts) and remove the bushing(s). Liberally apply silicone grease to the new bushings and install in reverse order. I was having an annoying creaking, pop sound when braking that went away when the bushings were replaced. The is a 20-30 minute task.
I've gotten lots of pros and cons on doing the bushings, and for the cost (thank you MikeFoxx), and time factor, I may just go ahead and do them when I do the brakes.