LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

Dirty Transmission Fluid

Thread Tools
 
Search this Thread
 
Old 11-18-17 | 11:44 PM
  #16  
Carheart's Avatar
Carheart
Thread Starter
Driver School Candidate
 
Joined: Oct 2017
Posts: 32
Likes: 1
From: Washington
Default

Should I just pull the drain plug and refill or take off the pan and replace the filter also?
Old 11-19-17 | 06:09 AM
  #17  
rkw77080's Avatar
rkw77080
Lexus Champion
 
Joined: Mar 2011
Posts: 2,186
Likes: 685
From: Texas
Default

If it were my car, I'd perform the 3-4 D&F process at 1 week intervals, as Jabberwock suggested. Dropping the pan to replace the filter can possibly create new leaks if not done properly.
Old 11-19-17 | 06:19 PM
  #18  
2013FSport's Avatar
2013FSport
Lexus Test Driver
iTrader: (2)
 
Joined: Aug 2017
Posts: 6,651
Likes: 1,536
From: OR
Default

Originally Posted by Bocatrip
I'd be extremely careful when it comes to your next move. You already mentioned that the car shifts smoothly and you mentioined you think the fluid looks dark and possibly smells burnt. Before doing another thing.. you have one major thing in your favor. Your car shifts as it should. Go to a shop you trust (not necessarily Lexus) and ask them to inspect your fluid. If you had mentioned your car is not shifting correctly.. that is another story and you would have no choice to to change the fluid. Here you have a high mileage car that by changing the fluid and by changing all of the fluid, you might very well end up with a car that won't shift or even move! The varnish that has built up over time might be the only thing holding your transmission's clutches from slipping. Changing transmission fluid (unless you are the original owner) might be a throw of the dice... be careful my friend. Do yourself a favor and reread the post from Johnhav430. It might be very relevant. You want to do the right thing, but it might not necessarily go that way. If it were me? I'd leave well enough alone until I had a problem which you might not ever have. Good luck and let us know how it works out.

Completely disagree. Like I said, fluid technology changed. Fluid does not varnish like it used too.

6 years at a tranny shop and seen plenty.

Again, doing what I posted gets you almost 1/2 the fluid per dump.

Do not disconnect the tranny cooler without fluid going back into the trans. That fluid is there to lube critical parts. YOU DO NOT WANT TO STARVE IT FOR 20min while adding fluid. A professional machine pumps fluid in.
Old 11-19-17 | 06:36 PM
  #19  
2013FSport's Avatar
2013FSport
Lexus Test Driver
iTrader: (2)
 
Joined: Aug 2017
Posts: 6,651
Likes: 1,536
From: OR
Default

Originally Posted by Stu
this is 100% true. I know because I did it to a perfect and perfectly running low milage Audi and lost the transmission 10 days later.
German cars do that kind of stuff regardless! =/

Granted old Asian Waner trans and the crap fluid they came with in the 60, 70, and early 80's used to varnish bad and they did die when yellow fluid was dumped out and fresh put in.

ATF is very high in detergent. Fresh detergent washes away the films of varnish creating internal leaks at clutch drums and other sealing lands that need fluid under pressure for proper operation.

I'd guess the Audi died from other complications.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
350rx
RX - 2nd Gen (2004-2009)
18
10-30-19 08:04 PM
danno52
RX - 1st Gen (1999-2003)
1
04-08-19 06:11 AM
DMPesso
Performance
16
12-10-10 11:55 AM
ISFer
IS F (2008-2014)
14
04-27-10 11:56 AM
cdvmagic
Maintenance
7
01-31-07 11:44 AM




All times are GMT -7. The time now is 01:33 PM.