LS - 3rd Gen (2001-2006) Discussion topics related to the flagship Lexus LS430

Keep or Trade?

Thread Tools
 
Search this Thread
 
Old 01-17-18 | 08:12 PM
  #16  
rkw77080's Avatar
rkw77080
Lexus Champion
 
Joined: Mar 2011
Posts: 2,186
Likes: 685
From: Texas
Default

Were you able to get the error codes from the Toyota dealership?

Your LS430 has 2 Oil Control Valves, part numbers: 15330-0F010 for the right and 15340-0F010 for the left. If one has failed, the other will probably fail soon, too!

These are maintenance items and you can order the OEM Genuine Toyota parts on Amazon.com at a good price (15330-0F010 listed for $83.00, 15340-0F010 for $63.93). These parts are just as easy to replace as the #7 igniter you replaced over the weekend - unplug the electrical connector, remove 1 bolt, and pull the OCV straight out from its socket.

So for less than half of what the dealer quoted, you can have both OCVs replaced. You can find cheaper after-market parts (less than $50 for the pair), but if this were my car, I would bite the bullet and get OEM parts.
Old 01-17-18 | 08:13 PM
  #17  
NL5's Avatar
NL5
Driver
 
Joined: Jun 2017
Posts: 101
Likes: 22
From: Wa
Default

Originally Posted by lexslexus
He said it would be either $300 or $340 to fix it (can't remember which). Seems like it's $100 higher than I think it should be. I've got a 10% off coupon. I'll try to find the best deal on parts but I'll end up with whatever will get me back on the road fastest.
I just changed the ocv on the wife's Es300. Super simple. Should be similar on our engines. Took about 15 minutes taking my time.

Edit - BTW, her car did something similar to what you described. Been good for a couple weeks now, so I am pretty confident that was the issue.

Originally Posted by campisi
.... what's an OCV?
Oil Control Valve. Adjusts the valve timing I believe.
Old 01-18-18 | 06:31 AM
  #18  
Johnhav430's Avatar
Johnhav430
Lexus Fanatic
 
Joined: Sep 2016
Posts: 8,491
Likes: 372
From: PA
Default

Originally Posted by NL5
I just changed the ocv on the wife's Es300. Super simple. Should be similar on our engines. Took about 15 minutes taking my time.

Edit - BTW, her car did something similar to what you described. Been good for a couple weeks now, so I am pretty confident that was the issue.



Oil Control Valve. Adjusts the valve timing I believe.
Believe they are the equivalent of VANOS solenoids on BMWs. On the BMWs., when people get a fault, it's usually for 1, not 2. So they swap them to see that the fault follows the solenoid, then replace. They're actually a bit pricey, $150 online each, which is why people like to verify a part is bad. There are eBay knock offs for $40 a pair (ugh I wouldn't). Some even clean them and put them back....
Old 01-18-18 | 08:11 AM
  #19  
ls430w140's Avatar
ls430w140
Advanced
 
Joined: Dec 2017
Posts: 714
Likes: 163
From: FL
Default

Originally Posted by rkw77080
Were you able to get the error codes from the Toyota dealership?

Your LS430 has 2 Oil Control Valves, part numbers: 15330-0F010 for the right and 15340-0F010 for the left. If one has failed, the other will probably fail soon, too!

These are maintenance items and you can order the OEM Genuine Toyota parts on Amazon.com at a good price (15330-0F010 listed for $83.00, 15340-0F010 for $63.93). These parts are just as easy to replace as the #7 igniter you replaced over the weekend - unplug the electrical connector, remove 1 bolt, and pull the OCV straight out from its socket.

So for less than half of what the dealer quoted, you can have both OCVs replaced. You can find cheaper after-market parts (less than $50 for the pair), but if this were my car, I would bite the bullet and get OEM parts.
RKw is absolutely right again. Replacing oil control valves on 3uz-fe is a piece of cake. I did mines not too long time ago. Couple of suggestions:1) Buying non-OEM valve may affect engine performance.2) Installing valve without small washer (included with the oem valve) may cause potential problem with incorrect valve operation.3) One of the valves replacement requires removal of some air intake parts. Other valve requires additional attention during removal as some wires are on the way and may break some connections.4) Once you replace them, reset engine ecu and you will notice a significant improvement in medium rpm range acceleration and, potentially, improved shifting as engine will now on enforce proper timing.5) Replace valves by yourselve. You will save tons of money.6) Be extremely careful at unscrewing the bolts that hold valves in the engine. Mine was broken. Also, do not apply force when you install them back to the engine. You can use hi temp thread sealant to protect threads.
Old 01-20-18 | 09:34 AM
  #20  
LS430inDE.'s Avatar
LS430inDE.
Racer
 
Joined: Apr 2009
Posts: 1,307
Likes: 71
From: Delaware
Default

Originally Posted by rkw77080
Were you able to get the error codes from the Toyota dealership?

Your LS430 has 2 Oil Control Valves, part numbers: 15330-0F010 for the right and 15340-0F010 for the left. If one has failed, the other will probably fail soon, too!

These are maintenance items and you can order the OEM Genuine Toyota parts on Amazon.com at a good price (15330-0F010 listed for $83.00, 15340-0F010 for $63.93). These parts are just as easy to replace as the #7 igniter you replaced over the weekend - unplug the electrical connector, remove 1 bolt, and pull the OCV straight out from its socket.

So for less than half of what the dealer quoted, you can have both OCVs replaced. You can find cheaper after-market parts (less than $50 for the pair), but if this were my car, I would bite the bullet and get OEM parts.
Excellent information RKW! I was just going to present the question, "do our LS's have TWO ocv's?" because I wasn't sure. Not only is the answer yes, but apparently from what I've read on this thread, it's super EZ! Wow. This might have to be another TO DO list for my and my LS. She's turning 150k in about 200 miles.

Super duper thumbs up for posting the part #'s, prices, etc, as well. I don't know why you haven't become a moderator yet. You consistently post with great information, part #'s, and repair procedures. I appreciate you, and I'm sure all the other CL folks do too.
Old 01-27-18 | 09:48 AM
  #21  
lexslexus's Avatar
lexslexus
Thread Starter
Driver
 
Joined: Feb 2017
Posts: 153
Likes: 8
From: GA
Default

Hi everyone. Just wanted to give an update. Just picked up my car from the Toyo dealership. I ended up having them change my OCV since I used up all of my AAA benefits and didn't feel comfortable driving it back to my house because it started to smell like something was burning the last time I drove it to get the codes read. So far, so good. Hopefully, I won't need another repair anytime soon lol.

Also, they gave me a printout of my codes. I had codes P0300, P0302. P0304, P0306, P0308, and P1351.

Last edited by lexslexus; 01-27-18 at 10:22 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KRobbins
Maintenance
0
07-03-18 10:57 AM
lexslexus
LS - 3rd Gen (2001-2006)
22
01-15-18 06:51 AM
vlogs300
GS - 2nd Gen (1998-2005)
4
05-18-12 01:08 PM
alohaincal
GS - 2nd Gen (1998-2005)
5
06-14-10 08:37 PM
RI-Lex
GS - 2nd Gen (1998-2005)
8
02-05-10 09:04 PM




All times are GMT -7. The time now is 09:30 PM.