I just figured out SUPER LOW MODE!!!
#33
#34
#35
JPMOTDYN;You have it on the LS460? If you do, when the car is off push the top left button and hold it then turn the car on. You will have to select mode or super low mode. Select super low mode and it will flash red warning you. Then go to setting M1 and you can go as low as 9 and if you hold down it will go to L. Try that, let me know if that works.
Where is the top left button your speaking off? Yes I have air suspension on my LWB.
Where is the top left button your speaking off? Yes I have air suspension on my LWB.
#36
JPMOTDYN;You have it on the LS460? If you do, when the car is off push the top left button and hold it then turn the car on. You will have to select mode or super low mode. Select super low mode and it will flash red warning you. Then go to setting M1 and you can go as low as 9 and if you hold down it will go to L. Try that, let me know if that works.
Where is the top left button your speaking off? Yes I have air suspension on my LWB.
Where is the top left button your speaking off? Yes I have air suspension on my LWB.
Do you have the DataSystems R Spec controller installed ?
#38
This is for FACTORY air suspension but requires a harness and controller made by Datasystems, which ties into the Air Suspension ECU. Once the controller and harness is installed you have the option of controlling the height, lowering and raising, with the controller. The factory suspension has not been modified at all, just teh controller tricking the computer. I hope this helps.
#39
You need an aftermarket part, Datasytems Air Susp controller for all the above to work.
#40
This is for FACTORY air suspension but requires a harness and controller made by Datasystems, which ties into the Air Suspension ECU. Once the controller and harness is installed you have the option of controlling the height, lowering and raising, with the controller. The factory suspension has not been modified at all, just teh controller tricking the computer. I hope this helps.
#43
Anyhow the part numbers are H0879 for the harness for the LS460 and the controller is ASC680L.