When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
tabs are notched... (notched towards outer edge) so lift each tab (start in upper corner) and work ur way around 1 by 1 as u pull the grille forward...
I finally removed the grille yesterday.It wasn't as easy as i thought it would be.There are seven tabs that have to be released before the grille can be removed. Two claws(tabs) on each side of the grille have to be released from the slots in the fender piece between the grille and light housing,and three larger ears (tabs) must also be pressed and released.I had a lot of difficulty getting the 4 claws out of the the fender slots.
I noticed the factory bulb is shaped like an L. All of the LED bulbs seem to be straight. I'm assuming that the wire and conector are long enough to have everthing fit back together correctly. I just don't want to get everything apart and find out I have the wrong bulbs.