afs light is blinking after bodywork.. help!!!!
#3
Could there be a harness the shop forgot to reconnect when reinstalling the headlight assemblies? One way to find out would be to look at your lights when you first turn them on AND your engine is running and see if either or both go through the startup process. If they are moving like they are supposed to, you won't miss it, as you know.
#5
Trending Topics
#8
Driver School Candidate
Join Date: Feb 2012
Location: FL
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I definitely would check to see if AFS is working first. Park in front of a wall, and start the car to see if they move. Or have a buddy start the car and you check it out for yourself.
#10
I know this reply is late but i have seen some other posts where the AFS lights blink because of the afs sensor is not reset after major changes in the supension or ride hight...
The afs light donot move when the car is still, it move after the car is at atleast 5 mph or so.
There are sensors in the rear axles which can be adjusted. when chaning them you might see a change in headlight aim.
hope this helps.
Also you can bent down and see the sensor bolt thrugh the rims. Its rear to the wheel bolts
The afs light donot move when the car is still, it move after the car is at atleast 5 mph or so.
There are sensors in the rear axles which can be adjusted. when chaning them you might see a change in headlight aim.
Also you can bent down and see the sensor bolt thrugh the rims. Its rear to the wheel bolts
Thread
Thread Starter
Forum
Replies
Last Post
313vip
GS - 2nd Gen (1998-2005)
21
09-19-07 09:00 PM