When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Changes made for Sema. Kbreak front and rear bumpers. Wald executive long wheel base sideskirts.*22 inch RC22 wheels provided by Rohana Wheels. It's gonna be a fun couple weeks in Vegas. Don't mind the blue tape. The car is still being detailed. And the missing mirror caps. Those are being changed too!
Changes made for Sema. Kbreak front and rear bumpers. Wald executive long wheel base sideskirts.*22 inch RC22 wheels provided by Rohana Wheels. It's gonna be a fun couple weeks in Vegas. Don't mind the blue tape. The car is still being detailed. And the missing mirror caps. Those are being changed too!
Can you Please give us a bit more info on them, such where to get them, installation info, etc?
Thanks in advance!
I believe they may be avail on Ebay (not sure) and are on supplier sites like Alibaba. They're around $190-$200 thru normal channels. I have a set I bought some months ago but haven't installed them yet- not sure if I want to go this route or OEM 2010-2012 swap or cut/mold in 2010-2012 blinker module into my existing mirror cover, or just leave alone...lol.
They are made in Taiwan and of ABS material. Build quality seems fine. I noticed one of the distributors of this product is Avest Co., Ltd. of Japan, same company distributing the LED tails.
You'll need to tap a turn signal wire source for the amber blinker- I believe there is a module under the driver side dash where you can tap into wires for both sides' signals.
If you want the white LED tubes to function as DRLs, then you need to tap that source. I suppose if you wanted to have them only come on with the parking lights, then you could tap that.
The reply above is pretty much the answer. I don't know the installation procedures or what to tap into. We have a wiring guru at our shop and did it all. Love how they work.
Sorry but off topic and new all this; Recently purchased a LS460 with the ML system and I blew the rear center sub, my warranty doesn't cover it so I have to replaced it myself so my question is how/ what do I take off to get to the rear center sub? anything will help thanks!!
I believe they may be avail on Ebay (not sure) and are on supplier sites like Alibaba. They're around $190-$200 thru normal channels. I have a set I bought some months ago but haven't installed them yet- not sure if I want to go this route or OEM 2010-2012 swap or cut/mold in 2010-2012 blinker module into my existing mirror cover, or just leave alone...lol.
They are made in Taiwan and of ABS material. Build quality seems fine. I noticed one of the distributors of this product is Avest Co., Ltd. of Japan, same company distributing the LED tails.
You'll need to tap a turn signal wire source for the amber blinker- I believe there is a module under the driver side dash where you can tap into wires for both sides' signals.
If you want the white LED tubes to function as DRLs, then you need to tap that source. I suppose if you wanted to have them only come on with the parking lights, then you could tap that.