Little bit of light work tonight
#18
Rookie
Thread Starter
Finally have vid uploaded of the Code3 710 installed the rears are a lot harder to get across them I imagined, will set aside a day when my strobes come in and do it all at once. When crossing the firewall, I ran 4 extra sets of wire one dedicated to power, the other is accessory power, the others are just switch wires. No more digging under the dash for 12V.
#20
Moderator
Finally have vid uploaded of the Code3 710 installed the rears are a lot harder to get across them I imagined, will set aside a day when my strobes come in and do it all at once. When crossing the firewall, I ran 4 extra sets of wire one dedicated to power, the other is accessory power, the others are just switch wires. No more digging under the dash for 12V. Video Link: https://www.youtube.com/watch?v=VJOhMagBZtA&feature=youtube_gdata_player
#22
We can all see it Tee, we just don't want you to get any ideas!
(It's working now chpten8).
(It's working now chpten8).
#25
Rookie
Thread Starter
#26
Driver School Candidate
Join Date: May 2014
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Swapping out my low beams to a higher temp. HID as well as my fogs, and you are correct connecting HID's to DRL will mot operate correctly also when the High Beams are activated they will take 3-5 seconds to fully charge before becoming useful, results=Allbad.
"Off-highway use only" also username says it all
"Off-highway use only" also username says it all
Last edited by chewbacca1; 05-13-14 at 06:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
509IS350
IS - 2nd Gen (2006-2013)
6
06-24-11 12:32 PM