When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello guys ,
I have seen threads about transmission issues but wanted some feedback on my isssue .
my transmission started blipping in the 3-4 gear change.
I changed the fluid : continued
changed the filter : continued
flush : continued
Through this process the blips became worse and even had problems in 4-5 or 5-6 can’t remember right now and reverse .
when I did my research I come to find out these three gears are on the same clutch pack and share a solenoid .
changed the solenoid : continued
ended up finding a used transmission and it worked fine the first few days and blip returned .
so I suspected the transmission ect.
when I checked it after the car cooling for over an hour it was scorching hot, after I disconnected for 1 minute it cooled .
When completely cold it will sometimes work fine . Chrome delete, headlight fog light black framed ,reverse lens smoke Sc300 hiding
I have ordered a used one to test.
questions :
1: anyone ever had this issue ?
2: does this ect need programming ?
3: are they specific to different models I.e. Long / awd / rwd ?
II know it has pressure to cooler since I flushed it with that line .
also it’s weird that the issue would only be only on one gear set.
same problem on both transmissions .
Yes I did change out the etc and the problem continued.
but funny thing I took it to an independent shop suspecting software to be the issue but when they diagnosed they found the software to be fine .
they cleared some codes and recommended I change the balance body or the transmission.
since I left the shop the transmission has been shifting fine .
The 3-4 flare is normal when cold. I think it might be due to oil draining out of the 4th gear apply piston or accumulator, causing it to delay engagement until it primes.
Hello guys ,
I have seen threads about transmission issues but wanted some feedback on my isssue .
my transmission started blipping in the 3-4 gear change.
I changed the fluid : continued
changed the filter : continued
flush : continued
Through this process the blips became worse and even had problems in 4-5 or 5-6 can’t remember right now and reverse .
when I did my research I come to find out these three gears are on the same clutch pack and share a solenoid .
changed the solenoid : continued
ended up finding a used transmission and it worked fine the first few days and blip returned .
so I suspected the transmission ect.
when I checked it after the car cooling for over an hour it was scorching hot, after I disconnected for 1 minute it cooled .
When completely cold it will sometimes work fine . Chrome delete, headlight fog light black framed ,reverse lens smoke Sc300 hiding
I have ordered a used one to test.
questions :
1: anyone ever had this issue ?
2: does this ect need programming ?
3: are they specific to different models I.e. Long / awd / rwd ?
do you solve the problem i have same issue reverse and 3 to 4th slip to then engage i have replaced the transmission and still same problem also replace the tcm nothing change