When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It seems likely that you have accidentally turned the VSC off while you were cleaning. I don’t remember if it is on the dash or the center console. Look around, it should be easy to spot. It may be labeled TRAC.
What?
Are you trying to say OP would get a C1201 from turning off VSC?
What?
In my '07, the TRAC OFF (Traction Control) button is located on the center console as shown in the pic below. Depress and release (while stopped, either in D or P if I recall correctly) will turn Traction Control off and will illuminate the corresponding icon above the speedo. Depress and hold for a few seconds, and the VSC (Vehicle Stability Control) will be turned off in addition to the Traction Control and will be shown in the center message screen. After turning off the vehicle and restarting, both automatically default to ON.
In my '07, the TRAC OFF (Traction Control) button is located on the center console as shown in the pic below. Depress and release (while stopped, either in D or P if I recall correctly) will turn Traction Control off and will illuminate the corresponding icon above the speedo. Depress and hold for a few seconds, and the VSC (Vehicle Stability Control) will be turned off in addition to the Traction Control and will be shown in the center message screen. After turning off the vehicle and restarting, both automatically default to ON.
I have tired this already it’s not working but when I disconnect the battery and connect it again and try it before the check vsc system shows up it will just disable the vsc it will show vsc off but traction won’t turn off
01-17-23, 12:58 PM
