Check VSC VSC off
#1
Driver School Candidate
Thread Starter
Check VSC VSC off
I have a 2001 LS430 UL,
my check engine light comes on when its cold, but it goes out after a day or 2, i had my freind check the codes it was P0172, P1125, TPS....
but right after he pullued his snap on scanner, the VSC off and a VSC message appeared. its been a couple of weeks, my check engine light is off, but the VSC off still on, and the cruise control doesnt work either, it says check cruise system, but i think its related to the VSC being on,
is there a way to reset the VSC light ?
thanks
my check engine light comes on when its cold, but it goes out after a day or 2, i had my freind check the codes it was P0172, P1125, TPS....
but right after he pullued his snap on scanner, the VSC off and a VSC message appeared. its been a couple of weeks, my check engine light is off, but the VSC off still on, and the cruise control doesnt work either, it says check cruise system, but i think its related to the VSC being on,
is there a way to reset the VSC light ?
thanks
#2
Intermediate
I have a 2001 LS430 UL,
my check engine light comes on when its cold, but it goes out after a day or 2, i had my freind check the codes it was P0172, P1125, TPS....
but right after he pullued his snap on scanner, the VSC off and a VSC message appeared. its been a couple of weeks, my check engine light is off, but the VSC off still on, and the cruise control doesnt work either, it says check cruise system, but i think its related to the VSC being on,
is there a way to reset the VSC light ?
thanks
my check engine light comes on when its cold, but it goes out after a day or 2, i had my freind check the codes it was P0172, P1125, TPS....
but right after he pullued his snap on scanner, the VSC off and a VSC message appeared. its been a couple of weeks, my check engine light is off, but the VSC off still on, and the cruise control doesnt work either, it says check cruise system, but i think its related to the VSC being on,
is there a way to reset the VSC light ?
thanks
#3
Driver School Candidate
Thread Starter
I think you have a point,
I had the car checked by the dealer, they said they couldnt find any problem with with the TPS, and there was no engine codes, however they found the other codes, for the YAW sensor, and the laser cruise,
they suggested that the laser cruise is triggered by the Vsc, and they wanted to change the Yaw rate sensor for 870$ total, but i thought that i the light just came on when i had a generic scanner plugged to the car,,
I had the car checked by the dealer, they said they couldnt find any problem with with the TPS, and there was no engine codes, however they found the other codes, for the YAW sensor, and the laser cruise,
they suggested that the laser cruise is triggered by the Vsc, and they wanted to change the Yaw rate sensor for 870$ total, but i thought that i the light just came on when i had a generic scanner plugged to the car,,
The following users liked this post:
sha4000 (03-24-17)
#4
Driver School Candidate
Thread Starter
Well, I guess after reading a lot of threads about the VSC, I need to recalibrate my yaw rate sensor.
my frfreind has a snap on ( solus) sacnning tool, can it be able to reaclibrate the sensor,...dealer quote me 775$ to do the job...
please advise, thanks....
my frfreind has a snap on ( solus) sacnning tool, can it be able to reaclibrate the sensor,...dealer quote me 775$ to do the job...
please advise, thanks....
#5
my car had the same problem......a friend had the modiis scanner by snap on and recalibrate it it no time
#8
Driver School Candidate
Thread Starter
got the problem fixed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
finally, i reset the vsc light by jumping Ts and Gc connectors, waited till i got a message vsc test,
shut off the car, took the jumper out....voila...lights off,,,,,
finally, i reset the vsc light by jumping Ts and Gc connectors, waited till i got a message vsc test,
shut off the car, took the jumper out....voila...lights off,,,,,
The following users liked this post:
telford (06-20-18)
#9
Driver School Candidate
Join Date: Jul 2002
Location: Texas
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
So what was the exact procedure you did to get your VSC light off? Where are the Ts and Gc connectors you mentioned? I am having the same problem. Thanks
If anyone else knows please chime in.
Henry
If anyone else knows please chime in.
Henry
#11
Lead Lap
iTrader: (2)
I think this is what they are talking about when resetting the VSC light.
1. Make sure the ignition (key) is in the off position.
2. Locate DLC3 connector (under the drivers side dash) and jump terminals ts and cg. (use old wires lying around).
3. Turn ignition to the on position (do not start vehicle).
4. VSC warning light will turn out for 4 seconds then start to flash.
5. Once the light starts flashing for a few seconds, turn the ignition off and remove jumper wires.
1. Make sure the ignition (key) is in the off position.
2. Locate DLC3 connector (under the drivers side dash) and jump terminals ts and cg. (use old wires lying around).
3. Turn ignition to the on position (do not start vehicle).
4. VSC warning light will turn out for 4 seconds then start to flash.
5. Once the light starts flashing for a few seconds, turn the ignition off and remove jumper wires.
The following 3 users liked this post by teamplayer:
The following users liked this post:
telford (06-20-18)
The following users liked this post:
JRap1952 (01-07-18)