'00 LS400 Brembo Front Rotors
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2004
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
'00 LS400 Brembo Front Rotors
Got these for my IS BBK conversion but decided to go with drilled slotted so I am selling these. They just been resurfaced too so as good as new.
Price = $50 + shipping or pick up if you're local
Pix
Price = $50 + shipping or pick up if you're local
Pix
#3
Driver School Candidate
Thread Starter
Join Date: Jun 2004
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I am doing a LS400 BBK conversion for my IS.
I have no idea as far as thickness go, the previous owner did this conversion for his IS and decided to go with Stop tech all around so he getting rid of it, the brake pad is as good as new so looks to me the rotors is rarely used, and the rotors just got resurface before it shipped to me too.
I have no idea as far as thickness go, the previous owner did this conversion for his IS and decided to go with Stop tech all around so he getting rid of it, the brake pad is as good as new so looks to me the rotors is rarely used, and the rotors just got resurface before it shipped to me too.
You're doing an LS400 brake kit? Cool
What is the rotor thickness on these?
What is the rotor thickness on these?
#4
Super Moderator
iTrader: (6)
If you have a set of calipers or micrometer, to insure the rotor is still within spec it may not be less than 1.024" and normal is 1.102". Thicknesses between the two is okay and will let the buyer how much wear the rotor can take before it is unuseable.
Some places are heavy handed when turning rotors.
Some places are heavy handed when turning rotors.
#5
Driver School Candidate
Thread Starter
Join Date: Jun 2004
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I tried my best to measure it as accurate as I can since I don't have access to a calipers. To me they are both more than 1" for sure.
Rotor #1
Rotor #2
Rotor #1
Rotor #2
#7
Driver School Candidate
Thread Starter
Join Date: Jun 2004
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Update to measurement on calipers.
Just happended to stop by my buddy shop and he measured it for me. The number are 1.091 and 1.092 respectively.
Thanks
Just happended to stop by my buddy shop and he measured it for me. The number are 1.091 and 1.092 respectively.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post