WTB: at least ONE fuel injector from a 98+ LS400
#1
Rookie
Thread Starter
Join Date: Jul 2005
Location: Iowa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
WTB: at least ONE fuel injector from a 98+ LS400
I'm looking for a fuel injector from a 98+ LS400 or GS400. 4.0L vvti V8. If any of you know of where I can get just one working injector please lemme know. I could buy 4 injectors w/ on fuel rail for $75 from a salvage yard but I don't really need all of that.
#4
Rookie
Thread Starter
Join Date: Jul 2005
Location: Iowa
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
I tried running some Seafoam through the gas already. No go. I then removed the injector and applied 5v to the pins and it didn't open or even make an effort to open. All the other injectors on that fuel rail open and closes with ease with 5v. I tried tapping on it lightly to dislodge it, soaked the pintle end in Seafoam. Also tried running Seafoam through the inlet end with 70 psi while applying +7v and it still wouldn't open.
I don't have a dealer here that's less than a 2 hour drive from me. I'd rather just buy one used one and save the money to send all 8 injectors to a a shop and have them all cleaned, balanced and blueprinted together. Something like www.cruzinperformance.com does.
I don't have a dealer here that's less than a 2 hour drive from me. I'd rather just buy one used one and save the money to send all 8 injectors to a a shop and have them all cleaned, balanced and blueprinted together. Something like www.cruzinperformance.com does.
Last edited by rysbrnr; 02-19-08 at 07:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post
DroppedGS
LS - 1st and 2nd Gen (1990-2000)
7
04-08-04 12:00 PM