quocman555

iTrader: (2)

Hello Everyone,

I am replacing my suspension cause it was time for a change. I am going from my Tein CS Coilovers to a Bilstein and H&R set up but I don't have the shock mounts anymore. Is there anyone converting to coilvers that might have these? BTW I will be putting up for sale Tein EDFC soon once I am able to swap these out. Thanks for everyones help.

quocman555

iTrader: (2)

Anybody? Or if you know anyone getting rid of stock ones.

PureDrifter

iTrader: (10)

kyb makes shock mounts, otherwise any 95-00 junkyard mounts will work, but will probably have dead rubber inside.

AVIA1541

I took my 98 LS4 to a repair shop because it was starting to bottom out (struts) The machanic told my the struts were shot and I needed lower ball joints both sides. I ordered KYB struts(ebay) and ordered the mounts from the dealer. Today I took the car to a local mechanic close to my job and picked it up by closing time. Driving home was a nightmare, every bump I hit went over smoothly but there was a horrible clunking noise. There was no shake or play in the steering, steering wheel straight, no pulling and does not appear to need an alignment
I'd spoken with the mechanic once over the course of the day to specifically ask how did the strut mounts look, he replied they were fine. Does any one have a suggestion where to go from here, or should I take it to another mechanic.

PureDrifter

iTrader: (10)

he didnt tighten something.