How-To Video DIY Spindle bearing greasing tool w/o touching wheel bearing preload
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2017
Location: FL
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
How-To Video DIY Spindle bearing greasing tool w/o touching wheel bearing preload
Hey guys,
I made a simple DIY tool that you can make for under $3 USD to grease your spindle bearings without messing with the wheel bearing lock nut, lock washer, or wheel bearing pre-load. This is great for annual services between wheel bearing repacks. The video is linked down below and it covers the entire process. The DIY tool lubricates the spindle bearing exactly the same as the slee tool besides the wheel bearing jam nut part. If you have any questions / comments let me know. Hope this helps you guys out.
I made a simple DIY tool that you can make for under $3 USD to grease your spindle bearings without messing with the wheel bearing lock nut, lock washer, or wheel bearing pre-load. This is great for annual services between wheel bearing repacks. The video is linked down below and it covers the entire process. The DIY tool lubricates the spindle bearing exactly the same as the slee tool besides the wheel bearing jam nut part. If you have any questions / comments let me know. Hope this helps you guys out.
Last edited by Tigger240; 07-01-17 at 04:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Tigger240
LX - 1st and 2nd Gen (1996-2007)
0
07-03-17 09:19 AM