Anyone have a how to install mirrortap
#2
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Do a search as I and other identified the wires in some old posts.
#3
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Just installed my Valentine V1 with the Blendmount and mirrortap. See this thread: http://forum.ih8mud.com/threads/blen...ine-v1.940943/
When you remove the rear view mirror, and disconnect the electrical connector, pin 1 on the mirror side connector is ground, pin 4 is +12V (switched via ignition). I pushed the mirrortap pins into these connector pins with needle nose pliers, and reinstalled the mirror. The link above has some pictures that I took of the completed installation so you can get an idea about how it all came together. Really easy, 30 minute install, good luck!
When you remove the rear view mirror, and disconnect the electrical connector, pin 1 on the mirror side connector is ground, pin 4 is +12V (switched via ignition). I pushed the mirrortap pins into these connector pins with needle nose pliers, and reinstalled the mirror. The link above has some pictures that I took of the completed installation so you can get an idea about how it all came together. Really easy, 30 minute install, good luck!
#4
Driver School Candidate
Thread Starter
Join Date: Dec 2010
Location: GU
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
How do you remove the panels?
Just installed my Valentine V1 with the Blendmount and mirrortap. See this thread: http://forum.ih8mud.com/threads/blen...ine-v1.940943/
When you remove the rear view mirror, and disconnect the electrical connector, pin 1 on the mirror side connector is ground, pin 4 is +12V (switched via ignition). I pushed the mirrortap pins into these connector pins with needle nose pliers, and reinstalled the mirror. The link above has some pictures that I took of the completed installation so you can get an idea about how it all came together. Really easy, 30 minute install, good luck!
When you remove the rear view mirror, and disconnect the electrical connector, pin 1 on the mirror side connector is ground, pin 4 is +12V (switched via ignition). I pushed the mirrortap pins into these connector pins with needle nose pliers, and reinstalled the mirror. The link above has some pictures that I took of the completed installation so you can get an idea about how it all came together. Really easy, 30 minute install, good luck!
#5
#6
Pit Crew
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Just installed my Valentine V1 with the Blendmount and mirrortap. See this thread: http://forum.ih8mud.com/threads/blen...ine-v1.940943/
When you remove the rear view mirror, and disconnect the electrical connector, pin 1 on the mirror side connector is ground, pin 4 is +12V (switched via ignition). I pushed the mirrortap pins into these connector pins with needle nose pliers, and reinstalled the mirror. The link above has some pictures that I took of the completed installation so you can get an idea about how it all came together. Really easy, 30 minute install, good luck!
When you remove the rear view mirror, and disconnect the electrical connector, pin 1 on the mirror side connector is ground, pin 4 is +12V (switched via ignition). I pushed the mirrortap pins into these connector pins with needle nose pliers, and reinstalled the mirror. The link above has some pictures that I took of the completed installation so you can get an idea about how it all came together. Really easy, 30 minute install, good luck!
is that the one you got?
#7
Driver School Candidate
Thread Starter
Join Date: Dec 2010
Location: GU
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Thread
Thread Starter
Forum
Replies
Last Post
JCtx
RC F (2015-present)
28
03-11-19 06:11 PM