'06 RX330 Rear Caster and Camber Specs??
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2006
Location: North Carolina
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
'06 RX330 Rear Caster and Camber Specs??
Hello -
Does anyone know the toe-in and camber specs for the rear of a 2006 RX330?
Thanks in advance for any help.
BTW the car is 100% stock.
Bob S.
(Please disregard 'caster' in the title; it obviiously should be toe-in for the rear!)
Does anyone know the toe-in and camber specs for the rear of a 2006 RX330?
Thanks in advance for any help.
BTW the car is 100% stock.
Bob S.
(Please disregard 'caster' in the title; it obviiously should be toe-in for the rear!)
Last edited by Rufus; 07-03-08 at 01:02 PM. Reason: Remove "caster" & replace w/"toe-in"
#4
Maintenance Moderator
iTrader: (2)
I won't have access to our alignment machine until saturday, if no one has answered by then, I'll look it up...
#5
Driver School Candidate
Thread Starter
Join Date: Jun 2006
Location: North Carolina
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RX330 Rear Alignment Specs?
Thanks Mitsuguy.
Since my last post I've measured the camber to be about 1.7 Degrees (Negative) on each side.........seems like an awful lot to me.......tires are wearing rapidly on the inside edges.
Bob
Since my last post I've measured the camber to be about 1.7 Degrees (Negative) on each side.........seems like an awful lot to me.......tires are wearing rapidly on the inside edges.
Bob
Thread
Thread Starter
Forum
Replies
Last Post