GS wanted

iTrader: (9)

I've upgraded my sub so I have a sealed sub box available for the JL Audio 10W7 for sale. The box is professionally made by Acoustic Dimensions using 3/4 MDF, 12 braces, and 2 standing wave boards.
It is glued/sealed w/ silicon and 2.5 inch brad nails. Also, the face is 1.5 inches thick and the box is covered in OEM grey factory carpet to match the trunk carpet.
Perfect for someone who has or is looking for a JL Audio 10W7 sub or a sub requiring the same specs. (1.25 cu. ft.)
Asking $70. NorCal pickup or delivery. I left the box at the shop in case another customer wants it but I can get pics of it if anyone is interested.

Thanks, jd

Dew23

iTrader: (1)

send me a pic dewsc300@gmail.com thanks.

Woogie

post pics por favor

GS wanted

iTrader: (9)

Will do ASAP. Thanks for your interest.
jd

GS wanted

iTrader: (9)

The shop has been REALLY slow w/ sending me the pics. They're supposed to send them tonight. But, if they don't I'll be out there this weekend so pics should be posted in no later than a few days.
Thanks, jd

GammaLex

Can you mount this box to the rear deck of the GS and use the OEM mounting hole for the stock 10"?

GS wanted

iTrader: (9)

actually, here is a pic of the old box installed. rear deck? yes. but i don't recall if you'll have enough space (depth) for the stock 10" sub. also, i sold my stock sub so i can't try it for you.


thanks, jd

49GS400

iTrader: (1)

Hey Im in NorCal and Im interested. I'd like to check it out first though. Let me know if you can meet up sometime this week or next.

GS wanted

iTrader: (9)

I'll have the box this weekend. PM me your contact info...
Thanks, jd

49GS400

iTrader: (1)

Check PM. Thanks.

GS wanted

iTrader: (9)

for those interested, here are the pics of the box. sorry for the delay.
John, I got your PM and replied w/ my #. I'm back in town so let me know.
Specs once again:
Professionally made by Acoustic Dimensions using 3/4 MDF, 12 braces, and 2 standing wave boards. It is glued/sealed w/ silicon and 2.5 inch brad nails. Also, the face is 1.5 inches thick and the box is covered in OEM grey factory carpet to match the trunk carpet.
Perfect for someone who has or is looking for a JL Audio 10W7 sub or a sub requiring the same specs. (1.25 cu. ft.)

1) box w/ polyfill


2) 1.5" mounting plate around the box and brad nails


3) back of box (construction)


4) inside of box (bracing and wave board)


5) inside of box (more bracing, other wave board)


6) polyfill

b1gredek

too bad you are up north or else i would pick this up for my jlw7

GS wanted

iTrader: (9)

there are a few members up here that frequent SoCal regularly. if you're friends with any of them and can arrange it i could drop the box off with them if you're really interested. =) i've been lucky enough to have a CL member bring stuff back from SoCal for me.

GS408

do you still have this box for sale?

question...how deep does it fit in the trunk space? From the pic it looks like it fits pretty flush. Is there any room from the panel behind the back seat to where the box actually sits? I have an amp mounted on behind the back seat so thats why I ask. Would there be any room or is the box designed to fit perfectly with no gap between the back seat?

thanks

also, would i be able to cut the hole and make it larger to fit a 12" woofer?

GS wanted

iTrader: (9)

yes. i still have the box. it fits the gap pretty flush in front because i have an enclosure cover for the front as seen in the picture. i'm not sure how much room there is between the back seat and the box but you could: 1) mount the box so it is not flush or 2) change where you've mounted your amp.
the box is made to spec for the internal volume required for the 10W7 including the bracing and wave boards. you would need to check the specs for whatever 12" woofer you have and compare the required internal volume. PM me w/ your subwoofer info. or if you're interested in a custom box for your 12. i do have a ported box for a 12" Diamond Audio TDX woofer also since i might be trying a bandpass box next.

thanks, jd