FS: 2 - 10'' Alpine Type-R DVC Subwoofers + Box
09-03-08, 01:33 PM
#1
Lead Lap
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: SoCal-Brea, Ca
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2 - 10'' Alpine Type-R Subwoofers + Box *PRICE LOWERED*
Hey Guys and Gals,
Up for sale today are my subs and box from my IS350 that Im parting out. The setup is 2 Alpine 10'' Type-R DVC subwoofers in a black carpeted box. These subs hit HARD, I mean really really hard. These are not cheap entry level subwoofers, these things are competition quality. The subs are in perfect working and cosmetic condition, no problems whatsoever. Nothing is wrong with the box either, no dents or anything. The subs retail for $179.99/speaker at Crutchfield and the box retails for $79.99. PRICE LOWERED TO $200 PICKED UP
Speaker Specs:
# 10" subwoofer with dual 4-ohm voice coils
# Kevlar reinforced pulp cone with Santoprene™ rubber surround
# cast aluminum frame with perimeter venting
# frequency response: 26-600 Hz
# power handling: 200-500 watts RMS (250 watts per coil)
# peak power: 1,500 watts
# sensitivity: 83 dB
# top-mount depth: 6-7/8"
# sealed box volume: 0.5-0.8
# ported box volume: 0.6-1.3
Big and bad and built for heavy-duty sound, Alpine's SWR-1042D 10" subwoofer delivers high-impact bass that you can hear and feel. Alpine has taken previous generations of its SWR Series subs and added the hottest technology for ground-pounding power and superb accuracy.
The pulp cone has been reinforced with Kevlar® (the material used in bulletproof vests) for extra rigidity, so it won't buckle under hard play. A rubber surround helps to maximize cone travel for deep bass, while withstanding the decay that can destroy a speaker. A redesigned thermal management system and aluminum airflow motor cover shed heat quickly for efficient operation and better power handling.
The 2" dual 4-ohm voice coils are big enough to handle lots of power while offering system wiring flexibility. The tinsel leads are virtually unbreakable — they're woven into the dual progressive Nomex spiders. An aluminum diecast frame provides a secure, non-resonant housing. The SWR-1042D is designed for use in sealed or ported enclosures.
Up for sale today are my subs and box from my IS350 that Im parting out. The setup is 2 Alpine 10'' Type-R DVC subwoofers in a black carpeted box. These subs hit HARD, I mean really really hard. These are not cheap entry level subwoofers, these things are competition quality. The subs are in perfect working and cosmetic condition, no problems whatsoever. Nothing is wrong with the box either, no dents or anything. The subs retail for $179.99/speaker at Crutchfield and the box retails for $79.99. PRICE LOWERED TO $200 PICKED UP
Speaker Specs:
# 10" subwoofer with dual 4-ohm voice coils
# Kevlar reinforced pulp cone with Santoprene™ rubber surround
# cast aluminum frame with perimeter venting
# frequency response: 26-600 Hz
# power handling: 200-500 watts RMS (250 watts per coil)
# peak power: 1,500 watts
# sensitivity: 83 dB
# top-mount depth: 6-7/8"
# sealed box volume: 0.5-0.8
# ported box volume: 0.6-1.3
Big and bad and built for heavy-duty sound, Alpine's SWR-1042D 10" subwoofer delivers high-impact bass that you can hear and feel. Alpine has taken previous generations of its SWR Series subs and added the hottest technology for ground-pounding power and superb accuracy.
The pulp cone has been reinforced with Kevlar® (the material used in bulletproof vests) for extra rigidity, so it won't buckle under hard play. A rubber surround helps to maximize cone travel for deep bass, while withstanding the decay that can destroy a speaker. A redesigned thermal management system and aluminum airflow motor cover shed heat quickly for efficient operation and better power handling.
The 2" dual 4-ohm voice coils are big enough to handle lots of power while offering system wiring flexibility. The tinsel leads are virtually unbreakable — they're woven into the dual progressive Nomex spiders. An aluminum diecast frame provides a secure, non-resonant housing. The SWR-1042D is designed for use in sealed or ported enclosures.
Last edited by trinityhk; 11-09-08 at 01:48 PM.
that question was already answered. read previous posts.
but it tucks in perfectly between the 2 fender wells. it slides all the way back and leaves a ton of storage room in the trunk
