Engine Build *pic*
#1
Driver
Thread Starter
Join Date: May 2007
Location: Pa
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
Engine Build *pic*
So i decided just to put everything into one link, so some of this will be repeat to some of you. Just got head back from the machine shop and man does it look nice. everything is super clean and ready to be assembled, so i have some work to do. Three angle valve job and milled the head for a new head gasket. If ever you need machine work done Powerhouse performance in New Alexandra is the place to send you stuff. This guy knows his S@#T if you know what i mean. I'm super excited to see how well this motor is going to run. cross your fingers.
Other Projects
Polished valve cover
Winter mods begin
Other Projects
Polished valve cover
Winter mods begin
Trending Topics
#8
Driver
Thread Starter
Join Date: May 2007
Location: Pa
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
I still have to buy my turbo and emu along with 3" exhaust and injectors(650-750cc). so i have a lot of stuff to do still. But 475-500hp is what im looking for. I thinkin with all my mods i should be able to reach that easy enough.
Last edited by Juangado; 03-11-08 at 08:48 AM.
#10
Driver
Thread Starter
Join Date: May 2007
Location: Pa
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
I'm tryin. Pratice makes close to perfect, and i never really realized how true it is when it comes to welding.
Here is some more pictures of the manifold. I had to cut the back a more of an angle, and i drilled and tap for holes on the bottom. I also fab up a new back piece. More to come later today.
Here is some more pictures of the manifold. I had to cut the back a more of an angle, and i drilled and tap for holes on the bottom. I also fab up a new back piece. More to come later today.
#11
Driver
Thread Starter
Join Date: May 2007
Location: Pa
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
I'm trying. Practice makes close to perfect, and i never really realized how true it is when it comes to welding.
Here is some more pictures of the manifold. I had to cut the back a more of an angle, and i drilled and tap for holes on the bottom. I also fab up a new back piece. More to come later today.
Here is some more pictures of the manifold. I had to cut the back a more of an angle, and i drilled and tap for holes on the bottom. I also fab up a new back piece. More to come later today.
#13
Driver
Thread Starter
Join Date: May 2007
Location: Pa
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts